Found that the temperature is too high or the temperature indicator kept shining, to stop and check to see if the tank cooling water is normal, there is no leakage at the tank, water pipes and joints. If no abnormality is found through the external inspection, the cooling water can be supplemented as required before continuing the driving. If the temperature is still too high after traveling a certain distance, the cooling water is reduced by a large number of parking inspections. This is due to the fact that the water jacket of the cylinder block is lost due to blisters or perforations. After finding this fault, repair should be done and do not take it lightly.
When the engine temperature is too high, you can use the hand to touch the temperature of the upper water pipe and the underwater pipe to determine the fault. If the temperature difference between the two pipes is very large, it can be judged that the thermostat does not work. If the accessories are not available on the way, the thermostat can be removed and replaced immediately after the unit is returned.
If there is air in the cooling system, air resistance will be formed, causing poor circulation of the cooling water, resulting in excessive engine temperature. The following methods can be used to deflate : Let the engine run at high speed, and gently open the tank cover until just gas is released. At this time, part of the cooling water will flow out with the gas, so repeatedly, until you feel that the gas has been discharged ( At this point, the temperature of the water pipe will be significantly different . ) After troubleshooting, cooling water should be replenished promptly.
   If the vehicle is driving on dirt roads or muddy roads for a long time, some dirt will adhere to the radiator. Over time, it will affect the heat dissipation effect and cause the water temperature to be too high. The radiator grille can be blown with compressed air and then flushed with a hose.
For more information on specific vehicles, please contact: 0722-7504111 Â Business QQ
Cement Ball Mill, also known as cement mill, Cement Grinding Mill, is a key equipment to grind raw material and clinker grinding unit in the cement manufacturing line, it can used in the following industry as well, such as chemical industry, power station, slag grinding plant, and so on, the finished fineness can be up to 425mesh, with feeding size less than 25mm. There are mainly two types of grinding method, one is closed-circuit and the other open-circuit grinding process, the rejected size will return to the cement mill for further grinding after processing with a classifier. There is lining plate and grinding ball inside the cement drum, which can guarantee the cement mill use for a long time.
Cement Ball Mill
Cement Ball Mill,Cement Grinding Mill,Cement Grinding Machine,Cement Grinder
Henan Mingyuan Heavy Industrial Machinery Company Co., LTD. , http://www.heavyequipmentchina.com