In the same two vehicles, a T mark is marked on the rear of the car. This means that when you start the shift, you feel a sense of pushing back, especially if you run at a high speed. Don't mention how cool it is. This kind of vehicle with T is what we call turbocharging. But will you drive a turbo car? Or is it like a regular car? Poor driving skills, improper use of turbocharger, normal maintenance do not pay attention, you can carefully destroy the rut.
Turbo vehicle driving skills
1, the vehicle starts
Turbo car need not need hot car? Turbocharger can only show its power when it is running at high speed. In this case, the turbine needs the protection of lubricating oil. When cold car, the oil index in all aspects has not yet reached the stage of protection, the lubrication effect has not been reflected, so the temperature should be raised to the normal operating temperature. In this process, it is necessary to allow the idling speed to run for a few minutes in the first few minutes of driving, and then step on the accelerator to allow the engine to run at a high level, which will give it a turbocharged effect.
2, the vehicle stalled
When we drive and stop at the usual time, we often turn off the key directly. Do not be so worried about turbocharged cars. The turbine temperature at this time is still very high, and even if the turbine is still running after the flame is turned off, it still needs the oil to continue its lubrication protection. If you think about turning off all of a sudden, it's like suddenly the air is blocked, and breathing is still going on, and that feeling of defiance is definitely uncomfortable. The same is true for turbines, and the life expectancy will be drastically reduced by natural cooling. So it's best to stay idle for a while and then turn off.
Maintenance of turbocharged vehicles
1, keep a good habit of regular inspections, often check the appearance, to see if the seal ring is damaged, the oil inlet pipe and return pipe interface whether loose or seepage. Whether the exhaust port exhausts oil. Does the turbocharger have abnormal noise or abnormal jitter? Do early detection and early maintenance.
2, maintenance selection of high-quality oil, turbocharged car should be maintained in the choice of full synthetic oil, this better guarantee the engine clean and protective. In addition, the engine air filter should be replaced in time and on time to prevent dust and other impurities from entering the supercharger impeller rotating at high speed.
Concrete Cutter is used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials. It is a walk-behind Concrete Cutter, can option the gasoline,petrol engines. The saw blade is diamond sawblade, popularly used for cutting concrete, asphalt, stone, etc. The enlarged bearing, reinforced power shaft.
FURD road cutters are designed for strength, durability and performance. Whether cutting concrete or asphalt, the reinforced steel box frame design adds strength necessary to reduce vibrations while sawing. Minimizing vibrations enhance the performance of the blade and extend the life of the saw.
Road Cutter,Concrete Cutter,Concrete Road Cutter,Road Cutter Machine
Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.furdroller.com