Steel Adhesive Wheel Balance Weights F160

Find HOPSON TYRE REPAIR® @ Essen 2016 in Germany during May.24-27, 2016.

Booth Number.: 11H26

 

We are now looking for worldwide agents for HOPSON TYRE REPAIR. If you are interested, please contact us today.

 

General Info:

 

Part No.: F160

Height:3.0mm(include tape 4.0mm)

Width:19mm

Length:138mm

Packing: 100strips/box, 4box/ctn  or  50strips/box, 8boxes/ctn

                  

Description:

 

HOPSON POWER WEIGHT offers a complete range of quality coated, non-coated and adhesive Wheel Weights for passenger cars, motorcycles and trucks. HOPSON Coated Wheel Weights are polyester coated(silver-grey) to prevent material staining on the alloy wheel. HOPSON adhesive wheel weights are pre-cut and require no additional cutting. A simplified organizational system makes wheel weight selection and application easy. Our goal is to become a partner, not just a product supplier. HOPSON POWER WEIGHT guarantee that its products will meet and exceed the highest quality standards in the industry. We are committed to ensuring your success.

 

F160 is 60grams steel adhesive weight, madeup of 4x5 grams and 4x10 grams segments.

 

Surface: Zinc plated and Epoxy coated is avaliable.

Installation of Adhesive Weights:

 

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish(e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

 

Pre-bending the weights:

Separate the correct gram(as calculated) from the bar. Mould the shape of the weight to match the rim radius(with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

 

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

 

Sticking the weight on:

Attached the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the centre to the left and right. A minimum pressure of 1kg/cm2 is required. The angle of the sticking surface should not be higher than 15 ºC to normal.

 

 

Find HOPSON TYRE REPAIR® @ Essen 2016 in Germany during May.24-27, 2016.

Booth Number.: 11H26

 

We are now looking for worldwide agents for HOPSON TYRE REPAIR. If you are interested, please contact us today.

 

General Info:

 

Part No.: F160

Height:3.0mm(include tape 4.0mm)

Width:19mm

Length:138mm

Packing: 100strips/box, 4box/ctn  or  50strips/box, 8boxes/ctn

                  

Description:

 

HOPSON POWER WEIGHT offers a complete range of quality coated, non-coated and adhesive Wheel Weights for passenger cars, motorcycles and trucks. HOPSON Coated Wheel Weights are polyester coated(silver-grey) to prevent material staining on the alloy wheel. HOPSON adhesive wheel weights are pre-cut and require no additional cutting. A simplified organizational system makes wheel weight selection and application easy. Our goal is to become a partner, not just a product supplier. HOPSON POWER WEIGHT guarantee that its products will meet and exceed the highest quality standards in the industry. We are committed to ensuring your success.

 

F160 is 60grams steel adhesive weight, madeup of 4x5 grams and 4x10 grams segments.

 

Surface: Zinc plated and Epoxy coated is avaliable.

Installation of Adhesive Weights:

 

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish(e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

 

Pre-bending the weights:

Separate the correct gram(as calculated) from the bar. Mould the shape of the weight to match the rim radius(with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

 

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

 

Sticking the weight on:

Attached the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the centre to the left and right. A minimum pressure of 1kg/cm2 is required. The angle of the sticking surface should not be higher than 15 ºC to normal.

 

 

Optical brightener

The role of the brightener is to convert the invisible ultraviolet radiation absorbed by the product into purple-blue fluorescent radiation, which complements the original yellow radiation to become white light, and improves the whiteness of the product under sunlight. Brighteners have been widely used in textiles, papermaking, washing powder, soap, rubber, plastics, pigments and paints.

Generally, brighteners are divided into two categories, one is water-soluble brighteners, and the other is water-insoluble brighteners. The former can be used as a brightener for paper, paint, washing powder and cotton fabrics. The latter can be used for whitening of chemical fibers and plastics.

It is often divided into:
Fluorescent brightener for detergents; Fluorescent brighteners for textiles; Fluorescent brighteners for papermaking; Fluorescent brighteners for plastics and synthetic materials; Fluorescent brighteners for other purposes.

This product is especially used for the molding and processing of various plastics and plastic products under high temperature. Because of its good heat resistance, light resistance and chlorine resistance, it is a brightener for polyester fibers. Polyester, cotton and other fiber blended fabrics The whitening effect is also particularly ideal, and can be used for the whitening of polyester stock solution.

Optical Brightener,Optical Brightener For Pvc,Optical Brightener Masterbatch,Optical Brightener Ob1,Price Optical Brightener

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com