Piston air compressor boot check skills

In order to use the Wuhan Juye Piston Air Compressor safely and efficiently, it is necessary to carry out the power-on inspection after the general commissioning and installation. The specific parts to be inspected are as follows:
1. Check the stability of Wuhan Juye Piston Air Compressor:
Before starting, first make sure that the giant air compressor is fixed and the screws are tightened. Another important point is that the air compressor operator must have a certain technical foundation and a strong sense of responsibility. It is strictly forbidden to leave the post privately while the piston air compressor is working.
2. Check the safety valve of Wuhan Juye Piston Air Compressor:
Before starting the air compressor, make sure that the safety valves of all levels are working properly. The pointer of the safety valve indicates the correct position. If the pointer is deflected, the piston air compressor should be operated before troubleshooting.
3. Check the air pressure of Wuhan Juye Piston Air Compressor:
Those who have operated air compressors generally know that when a piston air compressor is started, the starting current is several times larger than when it is normally operated. Such a strong starting current is a big challenge to the performance of the motor itself, to the transformer, and the gas transmission line, and it is easy to damage it. Therefore, how to shorten the starting time of the piston air compressor and reduce the starting current of the air compressor is a subject worth studying. So far, no-load start-up is the most effective measure to guarantee this requirement.
In order to meet this requirement, the current operation is to ensure that there is no pressure in the cylinder before the start of the Wuhan Juye air compressor. If there is pressure in the cylinder, the starting torque will become larger, so that the starting current of the motor will increase, which may easily cause motor overload or grid accident.
Therefore, before the start of the Wuhan Juye Piston Air Compressor, the operator must gradually check the pressure of the pressure gauges at all levels. If it is found that there is gas, the air compressor should be vented and depressurized.

Plug Valve

The plug valve is a closed or plunger-shaped rotary valve, which can be opened or closed by rotating 90 degrees to connect or separate the channel opening on the valve plug and the channel opening on the valve body.
Its valve plug can be cylindrical or conical in shape. In cylindrical plugs, the passages are generally rectangular; in conical plugs, the passages are trapezoidal. These shapes allow for a lightweight construction of the plug valve. Best suited for switching off and on media and for diverting applications, but may also be used for throttling depending on the nature of the application and the erosion resistance of the sealing surfaces

Plug Valve,Plug Gate Valve,Eccentric Plug Valve,Spherical Plug Valve

Jiangsu Qiantu Trading Co., Ltd. , https://www.qtpumptrade.com