Analysis of performance of heat transfer oil heater in reactor

Reactor Heat Transfer Oil Heater Performance Reactor Heat Transfer Oil Heater In the process of purchase, it is necessary to pay attention to the use of temperature, reactor size, preheating time, and storage space to avoid inconsistency with the actual production process. Oil heater heating oil tank volume and its temperature control, the reactor's own thermal uniformity and thermal efficiency, which kind of thermal medium flow control methods. According to the customer's production process to develop a variety of special models (double machine, multi-machine All-in-one type, hot/cold integrated machine, explosion-proof type, etc.) Reaction kettle oil heater and hot and cold temperature control equipment. As we all know, need to control the temperature of the reactor will have jackets or coils and other auxiliary equipment, reaction kettle heat transfer oil The heater uses this part of the auxiliary device to connect it with the unit through a pipeline to form a closed circulation system. The heat transfer medium is always circulated in the pipeline and the auxiliary device to transfer heat energy to the reaction vessel. After the heat is reduced, the heat-generating device inside the reactor heat-conducting oil heater will raise the temperature, and the heat-generating device will not work when the temperature is not reduced. of. The heat transfer medium inside the jacket or coil will gradually transfer the temperature to the materials that the reactor can not, making it meet the production process requirements. Reactor thermal oil heater has the following advantages: 1. It can obtain higher working temperature (≤350°C) under the operating pressure (<0.5Mpa) at the bottom, reducing the pressure rating of thermal equipment and improving the system. The security; 2, uniform heating and flexible, temperature control using PID self-tuning intelligent control, high temperature control accuracy (≤ ± 1 °C), to meet the strict requirements of high process standards. 3, small size, small footprint, can be Installed in the vicinity of heating equipment, no special boiler room, no need for special operation, can reduce equipment investment and operating costs; 4, operation control and safety monitoring device complete, automatic temperature control process, simple operation, easy installation 5, closed circuit heating, small heat loss, energy-saving effect, no environmental pollution, a wide range of use; 6, with low-temperature type (≤ 200 °C), medium temperature type (≤ 300 °C), high temperature type (≤ 350 °C), full product specifications, a wide range of user options. Reactor heater oil heater will configure the appropriate model according to your production process, should be based on the needs of the process to select the appropriate reactor temperature control machine, according to the size of the reactor, The required temperature to design different Rate of reactor oil heater.