What is the cause of premature bearing damage? How to improve the life of the bearing?
The number of revolutions or hours experienced by a bearing before pitting occurs under a certain load is called bearing life. Bearings within this life should be subject to initial fatigue damage on any of their bearing rings or rolling elements. However, in our daily practical use, it can be clearly observed that the bearing with the same appearance under the same working conditions has a very different actual life. What caused this? Xiaobian summed up the following points:
First, improper installation (about 16%)
1, the installation is too strong, which hit the bearing with a hammer on the bearing damage is the biggest; is also the main cause of deformation.
2. The installation is biased or not installed in the bearing position, resulting in too small bearing clearance. The inner and outer rings are not in the same center of rotation, causing disagreement.
Recommendation: Select an appropriate or professional bearing installation tool, and use a special instrument to detect it after installation.
Second, pollution (about 14%)
Contamination can also lead to premature bearing damage, which means that dust, metal chips, etc. enter the bearing. The main reasons include: opening the bearing packaging too early before use, causing pollution; the working environment is not clean during installation, causing pollution; the working environment of the bearing is not clean, and the working medium is polluted.
Recommendation: It is best not to disassemble the bearing before use; keep the installation environment clean during installation, clean the bearing to be used; and strengthen the bearing seal.
Third, poor lubrication (about 50%)
According to the survey, poor lubrication is one of the main causes of premature bearing damage. Including not adding lubricant or lubricating oil in time; lubricant or lubricating oil is not filled in place; improper selection of lubricant or lubricating oil; incorrect lubrication method, etc.
Recommendation: Choose the right lubricant or lubricant and use the correct lubrication method.
Fourth, fatigue (about 34%)
Fatigue damage is a common way of damage to bearings. Common causes of fatigue damage may be: long-term overload operation of bearings; failure to repair in time; improper maintenance; equipment aging.
Recommendation: Select the appropriate bearing type and replace the fatigue bearing regularly.
There are two types of vertical axis impact crushers. One is the rock impact metal crusher, where the material is thrown onto the jaw plate inside the crusher shell. The other is that the crusher has a crushing chamber that forms the shell. The rock can accumulate in the shell at its natural resting angle, and the material impacts the rock layer at a great speed, causing it to undergo some degree of fragmentation. After the rock is thrown onto an inclined plane, it deflects upwards to the upper part of the crushing chamber, thus shifting downwards. Then, the rock curtain continuously ejected from the rotor and subjected to secondary crushing is called a rock impact rock crusher.
In a vertical impact crusher, the circumferential speed of the rotor can reach up to 99m/s, and materials with very small particle sizes fed into the crusher will also be effectively crushed. It does not have an impact hammer and has minimal metal wear. The particle size of the feed is generally less than 60 millimeters. It can be used to crush hard abrasive materials, selectively crush soft and hard materials, and has drying performance. It can replace rod mills through mixed metals.
Vertical Impact Crusher,Vertical Impact Ore Crusher,Vertical Shaft Impact Crusher
SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com