· Subaru Automobile (China) Co., Ltd. recalled some imported Legacy series cars

Posted on

Recently, Subaru Automobile (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some of the imports from July 31, 2009 to June 7, 2012, starting from March 20, 2018. The 2012 Legacy series of cars. According to the company's statistics, there are 3,396 vehicles in mainland China.

Some vehicles within the scope of this recall have incorrectly indicated the contents of the maintenance operation method for the secondary air pump relay defect recall issued on November 1, 2016, and the relay may be installed in the wrong state during the recall operation. The position, failure to eliminate the original defects, may cause the resin parts to melt, emit odor and smoke, and even catch fire, there is a safety hazard.

Subaru Motors (China) Co., Ltd. will replace the modified secondary air pump relays for the vehicles within the scope of the recall according to the correct maintenance method, and check the relays in the previous installation position. If the installation is wrong, correct it to eliminate the defects. .

If the relevant user finds that the engine warning light is on, the engine compartment cover is smoking, and the odor is emitted, the vehicle should be stopped immediately and contacted for sale. The user should contact the dealer for repair as soon as possible after the recall operation begins.

The position of the secondary air pump relay indicated in the maintenance operation instruction book issued by the secondary air pump recalled and implemented on November 1, 2016 is in line with the actual layout of the vehicle, and the secondary air pump relay is installed in the correct position. Not affected by this recall.

Subaru Motors (China) Co., Ltd. will re-send customers by registered mail. Users can obtain information about the recall by logging on to Subaru Auto (China) Co., Ltd. website http:// or by calling Subaru Auto (China) Co., Ltd. hotline 400-818-4860. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.

Needle roller and cage assemblies are self­-contained, ready-­to­-mount bearings. In applications where the shaft and housing bore can serve as raceways, the assemblies can be used to create bearing arrangements that require minimal radial space.
Bearing features
Lowest cross section among rolling bearings 
In applications where less space is available, needle roller and cage assemblies offer a very compact solution.
High load carrying capacity 
Due to their large number of rollers, needle roller and cage assemblies have a high load carrying capacity. 
High stiffness 
Due to their large number of small-diameter rollers, needle roller and cage assemblies have high stiffness.

Radial Needle Roller And Cage Assemblies

Radial Needle Roller And Cage Assemblies,Radial Needle Roller Bearings,High Precision Radial Needle Roller Bearings,High Speed Radial Needle Roller Bearings

Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de