Sprinkler water should be well controlled

When it comes to controlling the amount of water on the sprinkler, this may be a concern for many drivers, because if it is to ensure that the sprinkler has a good state of operation, it will be able to implement greening and environmental protection. In the program, for a long period of time, the vehicle needs a lot of water, so how should the sprinkler control the water?

Some people who buy a sprinkler for the first time will always have an idea that they will think that the greater the number of sprinklers on the sprinkler is, the better. If the sprinkler is sprinkling water, the distance from the sprinkled water to the road surface will be shorter and shorter. In this case, the tanker of the sprinkler vehicle will be filled with water numerous times, increasing the number of times the water is added. However, the sprinkler is This process of going back and forth will also increase fuel consumption, making it impossible to achieve good economic results.

However, the number of sprinklers sprinkled water is not a specified parameter, and the actual situation is based on the conditions of the sprinkled ground has been determined by the weather at that time. If the road surface is relatively dry at that time, then the amount of watering should be increased for a long time. If the road is in a relatively humid environment when the weather is fine, the driver should reduce the amount of water sprayed. If there are some gravel and dirt roads, it is necessary to wait for the sanitation workers to clean the road before spraying.

However sprinkler watering amount can not be too large, excessive watering, it is likely to cause some low-lying sections of water, some water will flow into the water pipes along the road, which would virtually caused the economic and water resources The waste. In areas where there is a lot of mud and sand, it is easy to form muddy conditions when the water is sprayed too much. This can cause secondary pollution of the road surface. In more serious cases, it may even lead to sewers. Blocked situation. After waiting for the road to dry, a relatively large area of ​​pollution will be formed, which will inconvenience the sanitation workers' cleaning work. (Text / Sun Ni)

Hospital Medical airtight Sliding Door

The medical automatic door is a door that is generally installed in the operating room or the ICU ward for the medical staff to push in and out of the hospital bed. The medical automatic door has the function of inductive opening and safety anti-pinch. The medical staff only needs to extend the foot into the light control foot sensing box next to the entrance, and the door will automatically close.

After a period of time, the door will automatically close after the cart and medical staff have fully entered. If someone or a cart is next to the door leaf, the door will not close to provide a safe anti-pinch. In addition, the door frame of the medical automatic door is made of sealed profile, which has the characteristics of high air tightness; the light control foot sensing is adopted for the entrance and exit, so that the medical staff can open the door [without contact", which can effectively isolate the bacteria and personnel.

If you are interested in our products, please kindly contact us

hospital door,medical sliding door,automatic medical airtight doors,hospital automatic sliding airtight door,hermetic airtight shielding door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahss.com