Spray duster selection guide

The spray duster has become familiar with the new environmental protection model that has emerged as a new force under the modernization of urban sanitation. In particular, when fog and haze has been listed as a natural disaster in the city, spray dusters are commonly used as countermeasures against suspended particles and are more familiar to sanitation workers. However, the dust removal operation department of the road should select the type of spray duster and establish a scientific team of dust trucks. This requires reasonable guidance and advice. Therefore, Xiaobian Science co-ordinates the relevant influencing factors of selection and has the following guidance on how to set up the number and model of spray dusters.

喷雾压尘车的选型指导.jpg

First, do a good job in predicting the dust reduction effect of the dust-dusting truck before the model selection and the collection of big data such as the suspended dust density. Due to the different hardware elements such as the size and function of the spray duster, the effect of dust reduction is more obvious. The planning for expected dust reduction can clearly define what kind of spray duster is required. Only the prior large-volume data collection can effectively improve the dust-reducing effect of spray dusters after purchase. The planning and co-ordination of these two points requires the patience and meticulous work record of dust-reducing operations. At the same time, we must also grasp the real-time dust situation in the annual dust-falling area. Doing enough of these skills will not encounter a dilemma in the subsequent actual selection.

Second, when the spray duster is selected, it is guided by the preliminary planning data, and the number of spray duster models with a reasonable number of points is used for the graded degree. The road dust removal department shall make fine control over the dust removal path and efficiency of the spray duster daily. The spray duster with a relatively large proportion in the selection should be the vehicle that is used most frequently every day, is easy to operate, and has the minimum operating skill requirements. For some spray-dusting vehicles with good reserve of emergency supplies that are required for continuous outbreaks of fog and haze, they can only be equipped with provisions under the guidance of emergency estimates. It is necessary to make it clear that each spray duster has its own advantages and disadvantages. In order to fully meet the dust removal plan, it is not possible to form certain short boards in the dust removal operation with a single model configuration, nor to waste the purchase money without full purchase. This is the effective rule that allows car-buying capital to maximize its dust removal capacity.

3. After the spray duster is selected, it is necessary to timely adjust and update the models that are not applicable to the actual dust reduction or carry out the next round of procurement. Every year, the road dust-removal department has adjusted and changed the actual dust-removing effect requirements of the spray duster. Therefore, after the actual dust-falling operation has changed significantly, the spray duster should also be adjusted accordingly to eliminate the old spray-dusting vehicles that are technically backward models. And according to the new requirements, add a new spray duster. Only by replacing the blood of the fleet of spray-dusting vehicles in real time, can the city's dust emission requirements be met while the urban pollution is increasing and the dust removal requirements are increasingly stringent.


Electric Sanitation Vehicle

Functional three wheeled electric vehicles are widely used in various scenarios, meeting various usage needs without fear of any application challenges.

Electric Sanitation Vehicle,Electric cleaning tricycle,Garbage removal vehicle,Quick cleaning vehicle

Xuzhou Hengshang Mechanical and Electrical Co., Ltd. , https://www.hengsenergy.com