The greatest economic benefits are only possible if the daily troubleshooting of the sand making machine is done properly:
The sand making machine has a large swing:
1) The wear parts on the impeller are seriously worn
2) Feeding size is too large
3) Impeller flow path has obstructions
4) Replace consumables
5) Reduce the feed size
6) Remove the obstruction
Sand making machine product size is too large:
1) The triangle is too loose
2) Tighten the V-belt
Sand making machine: The idling resistance is too large:
1) Sealing the inner cover of the bearing
2) Open the upper seal cover to remove
Sand making machine bearing heat:
1) lack of oil or dust
2) Bearing damage
3) Refueling or cleaning the bearings
4) Replace the bearing
In the Sand (sand making machine) there is the sound of metal collide:
1) Lining or impeller wearing parts fall off
2) Retighten
Polyurethane Rubber Roller,Polyurethane Arc Rubber Roller,Electroplating Pressure Roller,Polyurethane Rubber Casting Roller
Jiangyin Mingda Rubber Roller Co,Ltd , https://www.mingdaroller.com