Model NO.: DP-FP-2500A
Rated Power: 125kVA*6
Longitude Wire Feeding: Pre-Straightened& Pre-Cut
Cross Wire Feeding: Pre-Straightened& Pre-Cut
Trademark: JIAKE
Transport Package: Inside with Plastic Film, Outside with Wooden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
Model NO.: DP-FP-2500A
Rated Power: 125kVA*6
Longitude Wire Feeding: Pre-Straightened& Pre-Cut
Cross Wire Feeding: Pre-Straightened& Pre-Cut
Trademark: JIAKE
Transport Package: Inside with Plastic Film, Outside with Wooden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
Technical Parameters| Wire diameter | 2.5-6mm | Welding electrode | 48PCS |
| Line wire space | 50-300mm | Longitude wire feeding | Pre-straightened& pre-cut |
| Cross wire space | Min.25mm(12.5mm,12.7mm) | Cross wire feeding | Pre-straightened& pre-cut |
| Mesh width | 2500mm | Overall size | 8400*2900*1700mm |
| Welding speed | 50-75 times/min | Rated power | 125kva*6 |
1. It adopts Japan Panasonic PLC Program.
2. It has Weinview Touch Screen.
3. It installs Schneider Low Voltage Apparatus and Schneider Air Switch.
4. It has ABB Switch.
5. It adopts China Tengen Isolation Transformer.
6. It has Delta Inverter.
7. It installs Japan Omron Power Supply.
8. The mesh pulling adopts Panasonic Servo Motor, high precision.
9. It has automatically line wire feeding car.
10. The mesh pulling system in cycle is automatically calculated.
11. It adopts welding transformer to save power supply.
12. It has Germany cable carrier to protect wire from being damaged.
Auxiliary Equipment
Wire straightening and cutting machine
Bending machine
Commercial Terms
| Payment | 30%T/T in advance, the balance 70% by T/T after check the machine before shipping or irrevocable L/C at sight. |
| Delivery time | 50 days after receiving the advance payment |
| Guarantee time | One year since the machine was installed at buyer's factory but within 18 months against B/L date |
|
After-sales service  |
We can send our one best technician to buyer's factory for installation and training. The buyer should be in charge of: 1. Two way air tickets for seller's engineer 2. Accommodation and meals for the engineer 3. Visa fee 4. Salary of the engineer, 80 USD per day, usually, 7-10 days 5. Translator |
Contact Me
 Technical Parameters
| Wire diameter | 2.5-6mm | Welding electrode | 48PCS |
| Line wire space | 50-300mm | Longitude wire feeding | Pre-straightened& pre-cut |
| Cross wire space | Min.25mm(12.5mm,12.7mm) | Cross wire feeding | Pre-straightened& pre-cut |
| Mesh width | 2500mm | Overall size | 8400*2900*1700mm |
| Welding speed | 50-75 times/min | Rated power | 125kva*6 |
1. It adopts Japan Panasonic PLC Program.
2. It has Weinview Touch Screen.
3. It installs Schneider Low Voltage Apparatus and Schneider Air Switch.
4. It has ABB Switch.
5. It adopts China Tengen Isolation Transformer.
6. It has Delta Inverter.
7. It installs Japan Omron Power Supply.
8. The mesh pulling adopts Panasonic Servo Motor, high precision.
9. It has automatically line wire feeding car.
10. The mesh pulling system in cycle is automatically calculated.
11. It adopts welding transformer to save power supply.
12. It has Germany cable carrier to protect wire from being damaged.
Auxiliary Equipment
Wire straightening and cutting machine
Bending machine
Commercial Terms
| Payment | 30%T/T in advance, the balance 70% by T/T after check the machine before shipping or irrevocable L/C at sight. |
| Delivery time | 50 days after receiving the advance payment |
| Guarantee time | One year since the machine was installed at buyer's factory but within 18 months against B/L date |
|
After-sales service  |
We can send our one best technician to buyer's factory for installation and training. The buyer should be in charge of: 1. Two way air tickets for seller's engineer 2. Accommodation and meals for the engineer 3. Visa fee 4. Salary of the engineer, 80 USD per day, usually, 7-10 days 5. Translator |
Contact MeÂ
Zigong Dongfang Tongyong Gas Compressor Co., Ltd , https://www.gascompressorsc.xyz