After the eleventh consecutive holiday ended, the CPPCC of Jinzhou, Liaoning Province carried out research on the organization of auto parts specialty parks in Jinzhou Binhai New Area. This is another new measure for the development of the auto parts industry by the CPPCC. The research group made a site visit to the park that was still under construction. It detailedly learned about the layout of the park, the progress of construction, and the situation of the project. It actively asked about the problems and difficulties encountered by the company and stated that it would do its best to coordinate and communicate and promote the solution. During the investigation, the CPPCC team also made a research and decision on the spot. The vice chairman of the CPPCC team took the lead in the case and sent someone to stay in the auto parts industrial park to help coordinate the development of the park.
Recently, the Jinzhou Municipal Committee has determined the “one-line and five-line†urban development strategy, that is, adhere to the construction of a central city in the coastal economic zone of Liaoning Province, seize the development of Jinzhou Bay, promote the development of the county economy, and promote the expansion and construction of the city. Promote the construction and improvement of the people's livelihood project, and promote the "five lines" of fostering and growing the emerging pillar industries. Among them, according to the Municipal Party Committee's clear municipal leadership team is responsible for the deployment of a new pillar industry, auto parts industry is responsible for the CPPCC.
As the new growth point of Jinzhou’s economy, the auto parts industry will be strengthened and enlarged, and the development of the auto parts industry proposed by the municipal committee will be completed in 2012. In early August, the Jinzhou CPPCC established Chairman Li Yuxia as The group leader, the vice chairman and the secretary-general of the deputy leader of the CPPCC “Accelerate the development of the auto parts industry†leading group; formulated the “City’s Consultative Meeting on Accelerating the Development of the Auto Parts Industry in the Cityâ€. The comments clearly stated that “the acceleration of the development of auto parts industry should be taken as the top priority of the work of the CPPCCâ€, and five work systems and seven main work contents were established, relevant work requirements were put forward, and decisions were made on the city’s automobiles. The parts and components industry carried out network research. Before the investigation, related personnel also specially trained.
In mid-August, Li Yuxia, chairman of Jinzhou City CPPCC, led a team to the relevant companies to conduct research on how to speed up the development of the auto parts industry in the city and arrange opinions on the “City’s Association to Accelerate the Development of Auto Parts Industry in the City†and entrepreneurs. They conducted a special seminar; 11 business leaders and heads of relevant government departments put forward nearly 20 pertinent opinions and suggestions on the above two issues.
The numbers are boring, but they are also the most convincing. In order to understand the basic conditions of the auto parts industry in the city and effectively promote the development of the company, the Jinzhou CPPCC formed 7 research groups with 26 questions, led by the chairman and vice chairs respectively to 8 counties (cities). The 42 auto parts companies in the district have started network research. With more than 100 participants, the CPPCC has created the largest number of participants in the survey, the number of research subjects, and the number of research objects. It has also collected data and written data of 163,000 words.
The investigation of the CPPCC was generally welcomed by enterprises. For each company, the chairman said first: "We have come to help." This is the voice of the CPPCC, and it is also the voice that the company looks forward to. During this period, the most talked-about topics for the CPPCC organizations were research topics, and the most researched topics were research and research. During this period of time, the common feelings of the Comrades of the CPPCC are that the pace of work has been quickened, and the pressure on work has increased, and the sense of responsibility for doing bad work has increased. After the completion of the investigation, the CPPCC of Jinzhou convened in a timely manner a report meeting on the investigation of each group. At the meeting, the research groups reported on the characteristics, status quo, existing problems, and suggestions for the next step of the city's auto parts manufacturers. At the same time, the CPPCC reported to the Municipal Party Committee on the “Investigation Report on the Development of Auto Parts Industry in the Cityâ€. The report objectively analyzed the status quo of the current auto parts production enterprises in the city, their production and operation status, their main characteristics, industrial layout, and the major problems and causes. They put forward the "active role of the city's auto parts and accessories industry chamber of commerce" and "build the automobile industry in western Liaoning as soon as possible." "Parts City", "As soon as possible to carry out a centralized integration of automobile parts enterprises in our city" and other nine major recommendations.
In order to promote the development of the auto parts industry on specific projects, the CPPCC also invited the “Jinzhou Group Project†with a total planned investment of 500 million yuan and an area of ​​about 500 acres. The project was settled in Xihai Industrial Park in Jinzhou Economic and Technological Development Zone in September. After the project is completed and put into production, it is expected that it will realize an annual sales increase of 2 billion yuan and an annual pretax profit of 230 million yuan.
HUS Environmentally Friendly Adhesive-lined Dual Wall Heat Shrink Tubing
Product Introduction
HUS Environmentally Friendly Adhesive-lined Dual Wall Heat Shrink Tubing is made of outer flame-resistant insulated polyolefin PE material layer and inner transparent EVA hot melt adhesive layer. Dual wall heat shrink tubing with superior insulation and sealing capacities against water, damp and corrosion and convenient stripping-fastening function, Our Dual wall heat shrinkable tube it's widely used in all kinds of wire harnesses, electric wires and cables, connectors, metal pipes and others.
Features & Benefits:
a) Flame-resistant, anti-UV
b) Heat Shrink Ratio: 3/1, 4/1
c) waterproof, damp-proof, anti-corrosion, prevent gas leakage
d) RoHs, UL, Halogen Free, REACH
Operation indexes:
First shrink temp: 70 degrees Celsius
Operating temp: -45~125 degrees Celsius
Up to standard: Approvals
Meet UL224, 125 degrees Celsius, 600V
Standard color: Black, other colors can be customized.
The special size or cut length, provide customized products according to the needs of customers.
Product images:
Dual Wall Tubing,Polyolefin Dual Wall Tubing,Waterproof Dual Wall Tubing,Dual Wall Heat Shrink Tubing,Dual Walled Electrical Heat Shrink Tubing
KEYUACE Materials Co., Ltd. , http://www.insulationtubing.com