High Quality Waste Plastic Grinding Machine

Model NO.: GE series
Computerized: Computerized
Certification: CE, ISO9001:2008
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Application: Profiles, Sheets, Film
Capacity Range: 200-600kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Zhangjiagang City, Jiangsu, China
HS Code: 8477800000
High Quality Waste Plastic Grinding Machine
High Quality Waste Plastic Grinding Machine

1.GE series is used economically for handling the defects during injection molding, sprue, pipes, profiles, sheets, films and nozzles. It is everlasting and easy to clean with longer service life.
2. A series of auxiliaries such as blowers, exhausters, conveyors, metal detectors are available upon requests.
3. Different applications require different rotor types but one aspect is the same on all ACERETECH rotors -the well proven chevron "V"-cut technology.
4. It not only
 reserves the advantages of cross cut technology, but also guarantee the cutting point only at the place where the blades cross instead of the whole blade. It considerably ensures lower noise,
less powder and prolongs the service life, thus saving
 the energy. "V"cut technology drives the materials towards the centre of the rotor and solves the problems such as stacking materials inside, heat from rubbing and excessive side-wall friction.

Main Technical Parameter:
Technical Data GE500/500 GE500/700 GE500/1000 GE500/1400
Machine weight in kg approx. 2500 3500 4200 6000
Machine Measure in mm approx. 1900x1700x2600 2000x1580x2800 2230x1860x2860 2400x2000x2900
Capacity approx. 300-500 500-700 600-800 800-1000
Feed opening in mm approx 500x500 500x700 500x1000 560x1400
Standard motor in kW 22 30 45 55
Number of rotor knives 3x2 3/5x2 3/5x2 3/5x2
Number of stator knives 2 2 2 4
Jig for preadjustment of knives included included included included
Standard screen in mm 10 10 10 10
Rotor diameter in mm 500 500 500 500
Opening device included included included included
Material collector included included included included

Machine Picture:
High Quality Waste Plastic Grinding Machine

This dryer is suitable for drying materials of moisture 30~60%. The dryer is equipped with a fuel boilers, inlet port, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are put into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer reduces the moisture to 8~12% with the advantages of low cost consumption and high efficiency.

Air Flow Pipe Dryer

Air Flow Pipe Dryer,Hot Air Drying Machine,Air Flow Pipe Dryer Machine,Sawdust Hot Air Pipe Dryer

Zhengzhou Solon Import & Export Trading Co., Ltd , http://www.pallet-machine.com