Modulus is a factor that determines the size of the teeth. The gear module is defined as a basic parameter of the modular gear tooth, which is artificially abstracted to measure the number of gear teeth. The goal is to standardize gear cutting tools and reduce costs. The modulus of the straight, helical and conical gears can be referenced to the standard modulo series.
With the continuous improvement of the level of industrial development, many custom-made mass-produced gears use non-standard moduli, making its significance weak.
If the gear has a certain number of teeth, the larger the module, the larger the radial dimension of the wheel. Modular series standards are based on design, manufacturing and inspection requirements. For gears with non-straight teeth, the modulus has the difference between the normal modulus mn, the face surface modulus ms, and the axial modulus mx. They are all at their own pitch (normal pitch, face pitch, and axis The ratio between the pitch and the pi is also in millimeters. For bevel gears, the module has a large end modulus me, an average modulus mm, and a small end modulus m1. For the tool, there is a corresponding tool module mo. The standard modulus is widely used. In metric gear drives, worm drives, synchronous toothed belt drives and ratchets, gear couplings, splines, etc., the standard module is a basic parameter. It plays the role of basic parameters for the design, manufacture and maintenance of the above parts.
Modulus m = pitch circle diameter d / number of teeth z = pitch p / pi
It can be seen from the above formula that the basic parameters of the gear are the diameter of the circle and the number of teeth. The modulus is only a parameter set by man and it is a ratio. It is related to the tooth thickness of the subcirculation, so it can measure the size of the teeth and is a historical product of the industrialization process. .
Tipack provides customers with multi-layer co-extruded Thermoforming films (top and bottom films). PA/PE or PA/EVOH/PE multi-layer co-extruded films have excellent oxygen barrier properties and are suitable for dairy products, meat and seafood, fresh vegetables and fruits, dry food chocolate and other foods. Tipack provides customers with a series of value-added services including 24-hour quick response, custom design and free samples, etc.
PAPE100 is a thermoforming film with a thickness of 100 mic, which is co-extruded by 7 layers of PA/PE. Laboratory tests show that the tensile strength of PAPE100 reaches 142 standard units, the heat sealing strength is 51N/15mm, the haze is 6%, the water vapor transmission rate is 5.2g/m^2*24h, and its oxygen transmission rate is It is 22Cc/m^2*24h.
EVOH150 is a thermoforming film with a thickness of 150 mic, which is co-extruded from PA/PE/EVOH through 11 layers. Similarly, the tensile strength of EVOH150 in the laboratory test is 44 standard units, the heat sealing strength is 35N/15mm, the haze is 6%, the water vapor transmission rate is 3.2g/m^2*24h, and the oxygen transmission rate is 2.1 Cc/m^2*24h.
Tipack provides food-grade fresh-keeping packaging solutions for food producers and sellers, including heat shrinkable packaging ( Shrink Bag , Shrink Film , Plastic Casing Film, etc.), thermoforming packaging ( Thermoforming Film , MAP Trays , VSP Trays , PSP Tray , Fruit Cup, etc.) ), and Plastic Sheets , Lidding Film , Skin Film , Vacuum Bag , Absorbent Pads, K Cup Coffee Capsule, Packaging Machine, etc.
Tipack is the drafter of China's "Technical Specification for Meat Heat Shrinkable Packaging" and one of the contributors to the industry standard "Technical Requirements for EVOH High Barrier Composite Plastic Containers for Canned Foods". Tipack has grown into an internationally renowned technology-based enterprise with independent core technology, independent R&D and quality inspection systems.
Thermoforming Film,High Barrier Thermoforming Films,Thermoforming Films For Food,Thermoforming Plastic Films
Tipack Group , https://www.tipackgroup.com