Model NO.: GATC-408
Loading Method: Dynamic Load
Display: Digital
Control: Computer Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Top
Cooling Rate: 0.7c~1.0c/Min (Average)
Pressure Range: RP~0.5kpa
Temp Fluctuation: +/-0.5%
Temp Range: 70c~+150c
Trademark: Grande
Transport Package: Strong Wood Case
Specification: 1100*1850*1700mm
Origin: China
HS Code: 9031200020
Product description:
High altitude low pressure simulation test chamber/Altitude test chamber
Altitude Test Chambers
Temperature testing at altitudes up to 100,000 feet.
Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:
- Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
- Simulation of high-altitude conditions like might be found in mountainous regions.
Features
- Temperature range from -70 to 200°C
- Altitude range from ground to 100,000 feet
- Optional humidity control when altitude system is off
- Chamber interior size specified by customer
-
Automatic altitude control, integrated with temperature controller
      -No manual setting of altitude level! - Vacuum pump sized for climb/dive rate required by application
- Viewing window and cable ports available
1.GB10590-89Â Low-temperature and low atmospheric pressure testing condition
2.GB10591-89 High-temperature and low atmospheric pressure testing condition
3. GB11159-89 low atmospheric pressure technical condition
4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber
5. GB/T2423.26-1992Â High-temperature and low atmospheric pressure test chamber
6.GJB150.2-86Â High-temperature and low atmospheric pressure(Altitude) test
7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
8,IEC60068-2-2.1974Â Testing methods of High-temperature test chambers
9,IEC-540
10,ASTM D2436
11,JIS K7212
12,DIN 50011
13,BS2648
14,Mil-Std 202G (conditions 105C, A/B/C/F)
15,Mil-Std 810G (condition 500.5)
16,IEC 60068-2-39
17,IEC 60068-2-40
18,RTCA/DO-160F
19,JIS W 0812
Â
Technical parameters:
| Model No | GATC-150 | GATC-225 | GATC-408 | GATC-800 | GATC-1000 | |||||
| Working room(L) | 150 | 225 | 408 | 800 | 1000 | |||||
| Inner chamber size(mm)W*H*D | 500*600*500 | 500*750*600 | 600*850*800 | 1000*1000*800 | 1000*1000*1000 | |||||
| Exterior chamber size(mm)W*H*D | 1000*1600*1400 | 1000*1750*1500 | 1100*1850*1700 | 1500*2000*1700 | 1850*1600*2250 | |||||
| Packaging volume(CBM) | 3 | 3.5 | 4.5 | 5.5 | 6 | |||||
| G.W.(KGs) | 320 | 350 | 400 | 600 | 700 | |||||
| Testing temperature range | -80°C,-73°C,-60°C, -40°C, -20°C, 0°C~+150°C, +200°C (300°C) | |||||||||
| Performance | Temperature range | -65ºC~150ºC | ||||||||
| Temp.fluctuation | ±0.5ºC(Room pressure) | |||||||||
| Temp.accuracy | ±2.0ºC(Room pressure) | |||||||||
| Heating up time | ≤60min(+20ºC~+150ºC,RP,No-Load) | |||||||||
| Cooling down time | ≤45min(RP) | ≤60min(RP) | ≤90min(RP) | |||||||
| Pressure range | Â RP~0.5kPa | |||||||||
| Pressure control tolerance | ±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa) | |||||||||
| Depressurization time | ≤20min | ≤25min | ≤30min | ≤45min | ≤50min | |||||
| Working environment | Temp:+5ºC~+35ºC;Humidity:≤90%RH;Airpressure:86-106kPa | |||||||||
| Material | Exterior chamber materia | Stainless steel plate+ powder coated | ||||||||
| Inner chamber materia | SUS#304 stainless steel plate | |||||||||
| Insulation Material | PU Fiberglass wool | |||||||||
| System | Air circulation system | Cooling fan | ||||||||
| Heating System | SUS#304 stainless steel high-speed heater | |||||||||
| Humidification system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser | |||||||||
| Dehumidification system | ADP critical dew point cooling/dehumidifying method | |||||||||
| Controlling system | TEMI880,990 | |||||||||
| Power kw | 8 | 10 | 12 | 15 | 20 | |||||
| Water supply | Water temperature:≤30ºC;water pressure:0.2~0.4MPa;flow rate:≥10T/h | |||||||||
| Other components | Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port. | |||||||||
| Safety protection device | Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp. | |||||||||
| Power supply | AC 3Ψ380V 60/50Hz | |||||||||
| Customized service | Welcome to Non-standard,Specail requirements,OEM/ODM orders. | |||||||||
Â
Optional accessories1,Low Humidity and Dehumidifying sytstem.
2,Inner glass door with manual operating ports.
3,Temp./Humi.Recorder.
4,Pure water treatment device
5,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.
6,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , automatic touchless car wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Automatic car wash equipment more and more popular in car wash business market, as can save employee fees and wash time mostly, bring investor much more benefit profit return. That's why choose the automatic car washing system.
Automatic Car Wash Center,Automatic Car Wash Design,Automatic Car Wash Business Plan,Car Wash Business Leisuwash
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdleisuwashtouchless.com