In the wet air “back to the southâ€, the work of opening the air-conditioning and humidifying and dehumidifying should be done now. When the air inside the vehicle is wet, the air-conditioning cold air should be turned on, which can not only remove the fog, but also have the function of dehumidification. Automotive air conditioning can adjust the temperature of the cabin, but also effectively remove the moisture inside the cabin.
Action Tips: Each time you start the car, start the car air conditioner at the same time, open the doors and windows, this principle is the same as opening the air conditioner to cool before driving in summer, not only can quickly let the air in the car circulate, but also can quickly dehumidify.
Second, waxing, to the car wearing "invisible coat"
You don't need to put a "coat" on your car, but "invisibility clothing" must not be worn. Waxing in the spring is equivalent to putting the “invisible coat†on the car, which can effectively prevent the fade and aging of the paint.
Action Tips: At present, there are a wide variety of car waxes on the market, and the selection of car waxes must be careful; improper selection not only does not protect the car body, but instead discolors the car paint. Should be based on the characteristics of car wax, the newness of the vehicle, paint color and driving environment and other factors.
For high-class cars, high-grade car wax can be used; for ordinary vehicles, regular pearl or metallic paint can be used; for new cars, it is better to apply light wax to protect the body's luster and color; when the driving environment is poor, It is appropriate to use a resin wax that has outstanding protection.
Of course, the choice of car wax must also be considered when adapting to the color of the car paint. Generally, dark car paint uses car wax of black, red and green series, and light car paint uses silver, white and pearl car wax.
Third, professional disinfection
Open air-conditioned, can enhance the air circulation in the car, improve the air environment in the car, but timely professional car care is essential, you can do a good job cleaning the car interior vents, seat corners and other common health corners .
Action Tips: It is best to go to a professional car beauty shop to carry out a clean-up inside the car. Through steam, UV, photocatalyst and other high-temperature sterilization means, let the car clean and dry inside.
Fourth, chassis armor, protect the car "down the plate"
After flushing, it is necessary to flush the chassis at least once. It is best to use high-pressure water to repeatedly flush the girder, transmission shaft, steering arm, and fender. After the car passes through the muddy road surface, the sludge on the underside of the vehicle is particularly likely to accumulate sludge. Check and clean the door and the drain hole at the bottom of the vehicle body. In particular, timely clean the voids on the underside of the vehicle to eliminate moisture. After buying a new car, it is best to do anti-rust treatment, not only to prevent sand and stone impact, but also resistant to acid rain and corrosion.
Action Tips: The new car can do a "chassis armored": the first step is to clean the car chassis, use a high-pressure water gun to rinse the surface and wipe it dry, and then use a hair dryer to dry; the second process is a strong degreasing, derusting, and then Use newspaper or plastic paper to cover the vulcanized parts of the car body (exhaust pipe, underside of the door, etc.); the third step is to spray paint.
Spray must be uniform, spray at least 3 times, every 15 minutes or so to make the paint dry. General chassis armor coating to achieve a thickness of about 2 mm will be better. In addition to "chassis armor," there is also a lower cost, more convenient to use spray - rust spray. The thickness of this spray is relatively thin, generally about 0.3 mm, and is mainly used for rust prevention and noise reduction. It can spray all parts of the chassis except the exhaust pipe.
Fifth, desiccant, bamboo charcoal, essential
In order to prevent cars from suffering from "rheumatism", owners can prepare several desiccant or dehumidification boxes in places such as compartments or back-up compartments where water vapour tends to accumulate, and pay attention to regular inspections and replacements to dehumidify their cars. Moisture protection.
Action Tips: When not in use, desiccants can be used instead of air-conditioning for dehumidification. It is better to buy a simple dehumidification box and put it on the corners so that the interior parts will not be affected by moisture overnight. Lime and bamboo charcoal also have a dehumidifying function. In addition, the old newspapers are rolled into a bundle and placed on the front and rear mats or in the trunk, which also has the effect of dehumidification.
Six, to the car sun "sunbathing"
Sunlight contains ultraviolet rays, infrared rays, and visible light. Like people, cars love sunbathing, especially in rainy and wet seasons. The sun-heated body quickly eliminates the internal water vapor.
Action Tips: When the weather turns fine, take time to sunbathe your car. In addition, cotton and linen products such as carpets and seat cushions in cars are more susceptible to moisture and bacteria. Therefore, it is best for the owner to dry or replace these items.
You can also choose a sunny day and try to clean the inside of the car with a neutral detergent. Open all doors and windows and use sunlight and ventilation to achieve disinfection.
Seven, paint peeling repair
After the paint and protective layer on the bottom and exterior of the car are peeled off, it may rust in the rain, and the moist air can also accelerate the “pathological changes†in the damaged parts of the car paint. Therefore, if your car has "trauma", it is best to deal with it as soon as possible.
Action Tips: To find a dry weather, to do a comprehensive medical examination of the car, repair body scratches and trauma, will play a very important role in protecting the car.
Eight, car audio often used
In the wet air season, the various chips of the car audio system have become quite delicate, and damp air is the most vulnerable to them.
Action Tip: It's best to turn on the sound every time you drive and let it work, which can reduce the erosion of the humid air into the sound system.
Modular grinding station can be widely used in 3c electronic products, household and sanitary ware, traffic and transportation, auto parts accessories, aerospace workpiece and millling workpiece precision fields. It has all the characters of Force Control System, or active contact flange, Constant Force Actuator---flexible control, quick reponse, instant adjusting.
Modular grinding station, grinding force control system, grinding active contact flange, grinding constant force actuator
DARU Technology (Suzhou) Co., Ltd. , https://www.yiwufizz.com