Dalian Institute of Chemical Industry produces a highly sensitive non-lead perovskite photodetector

Posted on

[ China Instrument Network Instrument Development ] The eye is the window of the soul and one of the most important organs of the human body. In the same way, one of the most important components in optoelectronic devices is its "eyes" - photodetectors. Recently, Han Keli, a researcher at the Dalian Institute of Chemical Physics, Chinese Academy of Sciences, used a solution method to prepare a high-sensitivity photodetector based on non-lead perovskite. Related research results were published in The Journal of Physical Chemistry Letters.

Photodetectors play an important role in signal processing, communications, and biological imaging. The current high-performance perovskite photodetectors are mostly based on lead-containing perovskites. For example, the research team had previously prepared a super sensitive lead-based perovskite photodetector (Advanced Materials). However, the lead contained in the heavy metal element will cause harm to the environment and humans, limiting its commercial application. The performance of non-lead perovskite photoelectric detectors reported so far is much lower than that of lead-containing perovskite photodetectors. Therefore, the preparation of high-performance non-lead perovskite photodetectors has become a hot spot in the current study.
Recently, the team successfully synthesized a perovskite single crystal containing niobium. By studying its carrier kinetics, it was found that this single crystal has the advantages of long carrier lifetime, high mobility, and long diffusion length. The use of this material to build a micro-scale photodetector can achieve high efficiency charge collection rate, and can achieve a high sensitivity response (40A/W) under low light, which is a non-lead perovskite photodetector that has been reported so far. The highest value. In addition, the study also found that the photodetector has a rapid response time of less than 1 millisecond, indicating that the Sb-based perovskite is a good photoelectric detection material and has a great advantage in replacing lead-containing perovskites.
The above work was funded by funds from the National Natural Science Foundation of China and other key projects.
(Title: High-sensitivity non-lead perovskite photodetector prepared by Dalian Institute of Chemical Industry)

Aluminum Die Casting Auto Parts/Car Parts is a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum Die Casting Auto Parts/Car Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.


Aluminum Die Casting Auto Parts/Car Parts is efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die cast, because the process provides very close tolerances for even complex shapes. Aluminum Die Castings can also be easily plated or finished. Aluminum die castings are dimensionally stable and heat resistant.


We have professionally produced bracket, valve rock, wiper system, cylinder head, motor case etc. for nearly 8 years. Aluminum Die Casting Auto Parts/Car Parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.

Aluminum Die Casting Auto Parts

Aluminum Die Casting of Auto Parts, Aluminum Castings of Auto Part, Die Casting Accessories, Aluminum Die Casting of CNC Machining

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , http://www.bldiecasting.com