1. In the process of gas turbine meter installation and connection, ensure that every link is accurate, including inspection of the site before installation, gas turbine meter wiring during installation , grounding of the system, etc. Real data is detected and can be accurately output.
2. For the metering system in operation, an "alternative method" can be used to confirm and eliminate metering gas turbine meter failures during operation.
3, gas turbine flowmeter gas turbine flowmeter regular overall cleaning instrument can be purged gas turbine flowmeter sensing head portion of the instrument, if necessary, to avoid condensation of the impurities at the sensor head. In the cold season, adding heat tracing devices to the metering straight pipe section and gas turbine meter section also helps to alleviate the condensation of impurities at the metering gas turbine meter.
4, gas turbine flowmeter regular drainage pipes, in particular water before the straight pipe is provided periodically discharged according to specific circumstances hand, reducing the moisture in the metering pipe as possible, the maximum negative pulsating fluid.
5 , to strengthen the management of the measurement system data, set the timing printing function, according to the print data combined with the production status of the gas turbine meter instrument operation analysis.
â— Used in aeroengine oil system.
â— All stainless steel construction.
â— Low lohm ,High flow capability.
â— high contamination carrying capacity for maximum protection.
â— The size can make to order according to the customer's demand.
Duplex Filter Element,Aluminum Casting Cap,Corrugation Filter Element,Hydraulic Filter Element
XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.pyefl.com