After Xiecheng County Association of Henan Province rescued two children who had fallen into the water and quietly departed.

Posted on

Henan Rucheng County Association police rescued two children after falling into the water and quietly left the diesel generator | diesel generator price / 2012-03-30

Shangqiu, March 29, “If it is not for the family to find the team, it is estimated that we still do not know the story of the time when the army saved the two children.” On the morning of March 29, Ma Shiquan, head of the traffic police brigade of Henan Rucheng County, told reporters.
According to reports, around 11 am on March 25th, 11-year-old boy Cao Zhen and 9-year-old boy Huang Xin, who lived on Wenhua Road in Shangqiu, accidentally headed into the canal while riding an electric tricycle to play along the canal. At this time, a good-hearted person walking around, after seeing the situation, responded quickly, too late to retrieve his mobile phone and wallet, and jumped into the river to save people. After saving the first child and saving the second child, he has no strength. In the end, he used his head to put the child ashore.
Witness Gong Xining told reporters that he was rowing in the river and saw two children riding an electric vehicle into the river. Because of the distance, they could only shout loudly, “Someone fell into the water, save the people!”, and then, I saw a man who ran very fast and jumped into the river to save only by taking off his coat. The man dragged the clothes of a child to the shore. When he went to help another boy, his body was already exhausted. He finally used his head to carry the child ashore and he helped the people around him. Only climbed ashore.
"After the good-hearted man came ashore, he did not want to reveal his own name. He left after he was rescued," Gong Xining told reporters.
After many setbacks, Gong Xining and the family of the children only found this well-intentioned person. He was a traffic coordinator in the Yuncheng County Public Security Bureau and was named Shi Jun. When they came to the hour of the army, the time was in the bed. Later, the family members of the children told the leaders of the units under the leadership of the time that the military had saved people.
“The spirit of saving the people at the crucial time is an image representative of the contemporary public security. We have reported his deeds to the county bureau, and the county bureau chief stated that it is prepared to carry out learning activities in the whole time.” Yancheng County Ma Shiquan, head of the traffic police brigade, said excitedly.
Next:Installation, use and regulation of marine diesel generator sets
Previous post: Experts rescued 3 stranded finless porpoises and returned to Poyang Lake

Inclined plate clarifier

Feiyiya Inclined Plate Clarifiers Use Gravity & Innovative Engineering

A gravity clarifier is the most economical method of removing solids from liquids, using natural gravity as the source of energy and it is free. A clarifier simply provides a non-turbulent zone where heavier than liquid solids, suspended by turbulence, are given sufficient time to settle to a quiescent surface. The HEI inclined plate clarifiers are compact units with multiple layers of settling area utilizing less than 25% of the floor space required by conventional clarifiers.

Principle of Clarifiers

A particle carried forward by the velocity of the liquid flow must settle at a rate that allows it to reach the bottom before passing through the clarifer. Thus, particles beginning at a point [a" must traverse some route lying between ab and ab` in order to avoid being carried over the outlet.

1701680328799

If V is the horizontal velocity of the liquid, S the solids particle vertical settling velocity, L the length of the settling device, and D its depth, then particles entering at point A will settle to the bottom of the device only if V does not exceed: S(L/D)Since Vmax / S = L / D then, Vmax = S (L / D)

Therefore, the velocity at which a horizontal clarifying device may be operated successfully is directly proportional to its length and inversely proportional to its depth.

This analysis applies to multiple horizontal plate units also. The spacing between plates is usually a few inches as opposed to a depth of several feet in a horizontal tank; therefore, [settling-out" times are dramatically reduced. The flow must be non-turbulent to prevent settled solids from being re-entrained within the moving liquid. Small plate spacing and a large surface area permits laminar flow at higher velocities than large horizontal tanks would allow.


Horizontal clarifying devices become self-flushing if they are inclined at an angle which exceeds the angle of repose of the settled solids. In such cases, flow enters the lower end of the device where settling particles move to the floor eventually sliding back out the entrance. Clear effluent leaves the top of the device.
1701680354228However, when the device is inclined, the furthest settling particles no longer fall through distance D but some longer distance D`. This new longer settling distance D` is related to D by the relation: D = D` cos Ø.

Theta [Ø" is the angle, the device is inclined to the horizontal plane. Thus settling distance is increased by the factor: 1/cos Ø In the case where Ø = 60º, 1/cos Ø = 2.

The maximum settling distance is twice the distance between the plates. It is apparent then that the lower the angle of inclination, the smaller the settling distance. However, the angle of inclination must exceed the angle of repose of the solids to be separated. The previous equation may be modified to express the cosine of an inclined plate clarifying system as:
Vmax = L / (D / cosØ) (s) = L·cosØ / D (s)


Inclined Plate Clarifiers
A reduction of the required floor space is acquired by diminishing the separation between the horizontal plates to a few inches and stacking the settling surfaces. Inclining the plates to provide self flushing, 45º for heavy particles and 60º for light particles, reduces the available horizontal projected area (effective settling area) by a factor equivalent to the cosine of the angle. The surface area diagram (below) graphically compares the floor space requirements of an HEI inclined plate clarifier with the equivalent horizontal projected settling area.

Settling Rate
The settling rate for a specific solids should be determined by standard laboratory tests. Light particles, such as metal hydroxides, usually require a design parameter of 0.25 – 0.50 gallons per minute per square foot of horizontal projected area. These low density solids require the inclined plates to be set at a 60º angle to induce the particles to slide down the plate. Heavier particles (such as sand that easily flow) will readily slide from plates set at a 45º angle.

1701221536993
Maximum flow rate of an inclined plate clarifier is based on the flow rate per unit of a horizontally projected surface area. Retention time in the clarifier is not a design criteria. However, attaining optimum performance requires the prudent design to recognize several additional, very important factors.

Inclined plate clarifier, Lanmei inclined plate clarifier, Inclined Tube Settler,High-Efficiency Inclined Tube

Wuxi Feiyiya Environmental Protection Technology Co., Ltd. , https://www.feiyya.com