Advanced ultra-resolution optical microscopy imaging has made a major breakthrough

Recently, researcher Zheng Wei of Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, in collaboration with Professor Hari Shroff of the National Institutes of Health, successfully developed a new two-photon excited super-resolution optical microscopy system that has both super-resolution optical microscopy And large depth 3D imaging capabilities to advance the depth of optical super-resolution imaging to record-breaking 250 microns, the corresponding research results published in the August 2017 issue of Adaptive optics improves multiphotonsuper-resolution imaging "Nature - Methodology" (Nature - Methods), Zheng Wei researcher is the article's first author and correspondent.

"Fine-looking" and "deep-looking" are the two major challenges in the field of optical microscopy. After decades of unremitting efforts by researchers, both in terms of "seeing the details" and "seeing the depth" A number of innovations have emerged and great successes have been achieved. However, optical microscopy imaging with both the ability to "see the details" and the "see the depth" is rare.

In this study, Zheng et al. Compared Two-Photon Microscopy (TPM) with deep biological tissue imaging capabilities and Instant Structured Light Microscopy (Instant Structured Light Microscopy) with super-resolution imaging , ISIM) organically combine to achieve two-photon excitation of super-resolution microscopic imaging. At the same time, the researchers successfully overcome the problem of wavefront phase distortion caused by biological tissues by using adaptive optics (AO) technology to finally achieve a horizontal resolution of 176 nm, a resolution of 729 nm and a resolution of 250 μm Depth of the imaging effect. Using this technique, high-resolution three-dimensional imaging of cells, nematode embryos and larvae, fruit fly brain slices and zebrafish embryos can be performed. The imaging results are significantly better than the traditional two-photon imaging. It is worth mentioning that, because the technology improves the photon utilization efficiency, thereby reducing the required laser power, the development of nematode embryos can be carried out for a long time, high-definition three-dimensional dynamic observation. It has no effect on nematode embryo development during up to one hour of continuous three-dimensional imaging, and this technique has an important role in embryonic development research.

The research was supported by the projects supported by the National Natural Science Foundation of China, the State Key Basic Research Development (973) Program and the Peacock Project of Shenzhen Overseas High-level Talents Innovation and Entrepreneurship.

The left panel shows the contrast between the results of two-photon imaging (2P WF), two-photon super-resolution imaging (2P ISIM) and two-photon super resolution (2P ISIM AO) combined with adaptive optics. In contrast to the three-dimensional imaging of cells located in the depth of 150 μm of collagen gel, the resolution of the new technology has been significantly improved both in horizontal and vertical directions. The lower right picture shows the three-dimensional observation of the nematode during embryonic development for 1 hour. The normal cell division process proves that the technology can be used for the dynamic research of embryonic development.


PTA Powder

Main application:Repair and strengthen workpiece surface, significantly

Welding method:PTA welding

Main equipment:PTA welding machine

Flame core temperature: about 10000℃

Technological characteristics:PTA has high temperature, concentrated energy, stable combustion, small heat affected zone, fast welding speed, high production efficiency, easy to obtain low dilution rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical bonding,, bonding strength is high.

Gpni0105b X100

PTA welding technology is one of surface strengthening methods, which has high deposition rate, low dilution rate, and could be applied with many kinds of powder. The manufacturing craft of PTA powder is normally gas atomization, which reduces satellite of powder. We supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based alloy powder, Cobalt-based alloy powder and Mixed Powder.

Nickel Based Alloy Powder possesses high temperature resistance and wear resistance, it is the most popular alloy powder applied by PTA welding both domestically and internationally. Coating hardness is within the range of HRC 30-60. It could be applied to various industries like agriculture, plastic, paper, marine and steel making where wear and corrosion protection needed. Some examples are plunger, moulds, pump leaf and screw.

Iron Based Alloy Powder is more widely used and a more economic choice. With high abrasive resistance, it is more commonly applied to mining tools, drilling tools and mixers of iron and steel making industry, coal industry, shaft, oil and energy industry.

Cobalt Based Alloy Powder is recommended for corrosion and oxidation resistance, with better hot hardness values than equivalent Nickel based alloy powder. It is widely applied to steel making industry, coal industry and mining industry.

Mixed powder mainly refers to NiCrBSi mixing with other hard-phase powder such as cast tungsten carbide and other cemented alloy powder, which allows the powder better hardness around HRC60 and excellent abrasion resistance.

Mixed powder is more often used for mining equipment for oil sands, lignite, oil drilling tools, excavator buckets, extrusion screws for plastic processing, grain and oil processing, etc.

PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com