Wireless monitoring system wireless bridge master-slave

The wireless bridge for transmission equipment used in the construction of the wireless monitoring system is affixed with master and slave on our labels. What does the Lord and the Slaves mean? The wireless bridge transmission has transmission and reception, and is used for pairing. At least two network connections are used. The Lord means to receive, and it is meant to be used as a launch bridge.

Because the wireless bridge has the function of two-way transmission, the master and slave are not so important when there are only two wireless bridges. Regardless of the main points, whichever one makes transmission or reception will do. What we are going to say next is the case of multiple networking. Many wireless bridges are used for networking in many projects. Some are one-to-many networking methods. Then, in this case, the master and follower will be different. Lean's wireless bridge will debug the equipment before leaving the factory, but in the one-to-many mode, several front-end slaves will be launched and installed within the angle of the main bridge. Of course, these devices can all be debugged and set up, even if they are not sent or received by the master or slave. However, it will be relatively troublesome. For some people who come into contact for the first time, they will not be modified, or they will be modified too much, which will make it difficult to use the wireless bridge normally.

Don't think of wireless bridges as complicated. It's really simple. It takes a few times and it makes perfect. Ryan also has specialized technical guidance. If you don't understand it, you can contact the technical staff of Lean directly.