Vertical Ribbon Mixer with High Efficiency Motor

Introduction:
Ribbon Mixer is primarily designed for use with dry materials, although gas and liquid streams can also be added. A wide variety of configurations, for either batch or continuous mixing, are available with sizes ranging from 100-20000 liter working capacity. Application specific rotor mixing element design allows shorter batch cycle times due to increased mixing efficiency. We can customize the design of the Ribbon Mixer to meet your specific mixing requirements. Mixing vessels can be standard U-shape or cylindrical depending on internal pressure or vacuum requirements.

Working Principle:
Ribbon mixer consists of transmission parts, double ribbon agitators and U-shape cylinder. In the direction of rotation, the outer ribbon pushes materials from both ends to the middle, while the inner ribbon pushes materials from the middle to both ends. Ribbon wind with different angle direction carries the materials flowing in different directions. Through continuous convective circulation, the materials are sheared and mixed thoroughly and quickly.

Features:
1)High mixing precision

2)Good sealing, easy cleaning

3)Short batch mixing time

4) Small size ensures installation convenience

5) Materials: Carbon steel, stainless steel

6) Main shaft seal: Stuffing seal and air purge seal

7) Large amount of loading

8)Delivery time: 15--40 days, Pay term: FOB, CIF

Datasheet:
1.     Working volume is calculated when material bulk density @1;
2.     Changes are available according to customer's special requirement;
3.     Shuang Long Group might develop new data which is not modified timely on the Web.


Typical Processed Material We've done before:
 
Animal Feed                                  Baby Food
Flavoring                                       Milk Powder
Bakery premixes                            Dried food products
Engineered plastic resins                Pesticides and herbicides
Epoxy resins                                  Pharmaceuticals
Fertilizers                                      Plastic powders
Carbon black                                 Fire retardants
Polyethylene                                 Chemicals
PVC compounding                         Cleaning compounds
Talcum powders                            Laundry detergents

   
      

Cross Flow Cooling Tower

Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.

The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.

A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.

The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.

Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com