Valves dynamic performance evaluation is the key

Over the years, people have considered a number of traditional factors when choosing a control valve, such as pressure ratings, pressure drop, flow media, temperature, and cost. However, the situation has changed dramatically in the past 10 years and much progress has been made in valve design, and the cost-effectiveness of the manufacturing process is quite different from what it was before, making many of the more traditional factors that have to be taken into account before choosing a valve The importance has been greatly diminished. Dynamic Characteristics Although some traditional factors are still important, they only emphasize the "static" performance of the valve. In fact they are the result of measuring the valve on the "workbench," but the result is hard to say what kind of performance the valve will behave in real-world conditions. Traditionally, it has been suggested that careful adjustment of the static factor will give the valve (and hence the entire circuit) good performance. However, we now recognize that this is not always the case. Thousands of performance tests conducted by researchers and manufacturers demonstrate that up to 50% of valves in service, many of which are selected by considering traditional factors, have had little effect on optimal control loop performance. Subsequent studies have shown that the dynamic characteristics of the valve play a very important role in reducing process variability. In many key processes, different valves reduce process variability by a factor of 1 to dramatically increase productivity and reduce waste, resulting in more than $ 1 million in economic benefits. Obviously, this economic efficiency makes it entirely possible to deny the traditional approach, that is, only based on the initial purchase price of the valve to decide whether to buy. Second, the conventional wisdom has always been that improvements in process optimization always come from upgrades in control room control instrumentation. However, the test data shows that the dynamic characteristics of the valve can have a significant impact on circuit performance with the same control instrumentation. If the accuracy of the control valve can only be as low as 5%, it can not do much to spend a lot of money configuring an advanced control instrumentation system with a control accuracy of up to 0.5%. Valve Types When looking for a valve that matches your application, consider the four basic types of throttling control valves, cage ball, rotary float, eccentric and butterfly valves. Cage ball valves are available in a wide variety of trim forms to meet the needs of most applications, making them the first choice of any valve. There are many kinds of cage ball adjusting pieces, including balance adjusting piece, unbalance adjusting piece, elastic seat adjusting piece, constrained adjusting piece and full size adjusting piece. In many cases, the various trim configurations of a valve body are interchangeable. Cage ball valves also have several disadvantages. First, the size of the valve is limited (usually 16 inches); second sight valve with the same specifications (such as float valve or butterfly valve) compared to its capacity is relatively low; third is the higher price, especially large Cage ball valve. However, cage ball valves have excellent performance, often enough to compensate for these drawbacks, in reducing process variability. Rotating float valve flow than the same diameter cage valve larger. Although the control range of the rotary float valve is larger than the cage ball valve, it is still superior to most other types of valves. Rotary float valve allows the pressure drop and allowable temperature range smaller than the cage valve. Normally their pressure drop is limited to 7.0x105kg / m2, suitable for use at temperatures below 398 ° C. Float valves are not suitable for liquids that can be vacuoles and often give higher noise when used in gases with higher pressure drops. Eccentric valve friction than the smaller ball valve, the price is lower. Unique structural design makes it more precise for the control of process variability. This is evident from Fisher's new BV500 product. In addition, the advantages and disadvantages of eccentric valve float valve is not much difference. By valve performance to measure, the butterfly valve is a low-end valve. Butterfly valve flow, the cheapest price, but there are many different caliber. However, the butterfly valve characteristic curve is only a proportional curve, which greatly limits the butterfly valve to reduce flow variability performance. For this reason, the butterfly valve can only be used in fixed load situations. Although butterfly valves are available in a variety of different caliber and can be made from most cast alloys, butterfly valves do not meet the ANSI requirements for face-to-face dimensions and are not suitable for fluids or noises that are subject to cavitation .

TPU For Tube And Hose

Thermoplastic Polyurethane (TPU) is a type of polymer resin that is known for its flexibility, durability, and versatility. It is a thermoplastic material, which means it can be melted and reprocessed multiple times without losing its original properties.

TPU is commonly used in various industries, including automotive, electronics, footwear, and sportswear. It is often used to make products such as phone cases, cables, hoses, seals, gaskets, and inflatable structures.

Some key properties of TPU include:

1. Flexibility: TPU has excellent flexibility, allowing it to bend and stretch without breaking. This makes it suitable for applications where flexibility is required, such as in shoe soles or flexible electronic components.

2. Abrasion resistance: TPU has good resistance to abrasion, making it suitable for applications that require durability and resistance to wear and tear.

3. Chemical resistance: TPU is resistant to many chemicals, including oils, solvents, and greases. This makes it suitable for applications where exposure to chemicals is expected.

4. Weather resistance: TPU has good weather resistance, meaning it can withstand exposure to sunlight, moisture, and extreme temperatures without degrading or losing its properties.

5. Adhesion: TPU has good adhesion to various substrates, allowing it to be easily bonded or laminated with other materials.

Overall, TPU is a versatile material that offers a balance of flexibility, durability, and chemical resistance, making it suitable for a wide range of applications.

Tpu For Tube And Hose,Food Grade Tpu Tube,Flexible Stpu Tube And Hose,Fda Grade Tpu Material

XUCHUAN CHEMICAL(SUZHOU) CO., LTD , https://www.xuchuanpu.com