After the workpiece is clamped once on the machining center, the digital control system can control the machine tool to automatically select and replace the tool according to different machining processes, automatically change the spindle speed of the machine tool, the feed speed and the movement track of the tool relative to the workpiece and other auxiliary functions. The processing of multiple steps on multiple surfaces of the workpiece is completed. And there are a variety of tool change or knife selection functions, so that the production efficiency is greatly improved. Due to the concentration of the process and automatic tool change, the machining center reduces the time for workpiece clamping, measurement and machine adjustment, so that the cutting time of the machine tool reaches about 80% of the machine start time (only 15 to 20% for ordinary machine tools); It also reduces the workpiece turnover, handling and storage time between processes, shortens the production cycle, and has obvious economic effects. The machining center is suitable for small and medium-sized batch production with complex parts, high precision requirements and frequent product replacement. Compared with the vertical machining center, the horizontal machining center has a complicated structure, a large floor space, and a high price. Moreover, the horizontal machining center is inconvenient to observe during processing, and the parts are not easy to be clamped and measured, but the chip removal during processing. Easy, good for processing. (Finish)
Rewinding Machine,Slitting Machine ,Winding Machine ,Slitter Rewinder Machine
Film Blowing Machine Co., Ltd. , http://www.nbfilmmachine.com