After years of development, China's metrology equipment and equipment companies have formed an industrial system with a relatively complete range of categories and a certain technological basis and production scale. Today, there are more than 6,000 domestic measuring instruments. China has become the second largest measuring instrument and meter producer in Asia except Japan. The general situation of the domestic measurement instrumentation industry is moving forward. However, there are still many problems and it is facing a serious situation.
In today's information age, competition in the industry is very fierce. If you slow down the pace of development, you will be left behind. However, the domestic level of metering and instrumentation industry has slowed down, and large and high-end equipment and equipment are almost entirely dependent on imports. Many urgently needed special-purpose instruments are still blank, and there are many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and industrialization is a “bottleneck†that restricts the development of China's metrological instrumentation industry.
China has become the second largest metering instrument and meter producer in Asia except Japan. The general situation of China's metrology and instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of the meter industry. Shangpu consulted the electronics industry analyst pointed out: At present, the development status of China's metering equipment is roughly the complete range, the small scale of the company is inefficient, and the product level is low. The development of China's instrumentation industry lags behind and there are many problems and it is facing a severe situation.
There are three main factors that restrict the development of China's metrological instrumentation industry: First, in today's information age, industry competition is fierce. If you slow down the development rate a bit, you will be left behind. However, the level of China's metrological instrumentation industry has slowed down, and large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special-purpose instruments are still blank, and there are still many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and its industrialization is a bottleneck restricting the development of China's metrological instrumentation industry. Second, China's measurement instruments, although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability are not high. This has greatly limited the scope and credibility of China's metered products. Third, the development of the metrology instrumentation industry has also been constrained by four major objective environments. On the one hand, taxation is too heavy; on the other hand, the relevant departments lack understanding of the importance of the development of measurement products industry, and insufficient support. Third, the lack of procurement policies to support the development of national industries. Fourth, China's basic industry capability is poor. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.
The general situation of the domestic measurement instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of the meter industry. The development of China's metrological instrumentation lags behind, there are many problems, facing a severe situation, and its main factors are concentrated in the following four aspects:
First, the progress of technological innovation and industrialization is slowed down Modern metering is a highly integrated product of optical, mechanical, electrical, computer and many kinds of basic disciplines. It is very sensitive to new technologies and is a new technology application and development in replacement of modern industrial products. One of the most rapid categories is the launch of new products every year. Especially in today's information age, competition is becoming increasingly fierce and a slight slowdown in the pace of development will be far behind. Now that we have entered the 21st century, the general level of China's metrology and instrumentation still remains at the international level in the early 1980s. Large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special instruments and equipment are still blank. There are many difficulties in ensuring quality that need to be overcome. The delay in the development of technological innovation and its industrialization is a "bottleneck" that restricts the development of China's metrological instrumentation industry. There are three main factors constraining the technological innovation and development delay in China's metrological instrumentation industry: The first is that scientific research funding is seriously inadequate; The second is the lack of talent; the third is the lack of effective integration of government, production, education, research, and application.
Second, product stability and reliability can not be a fundamental solution to China's long-term measurement products, including industrial automation instrumentation systems, communications equipment and equipment, although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability not tall. This has greatly limited the scope of use and credibility of China's metrology products. There are three main reasons for this:
(1) The development of basic technology research was neglected for a long time.
(2) The quality of domestically produced common parts and basic parts is not critical.
(3) The quality control and management of the company's products are weak, and the quality of the products is not relevant.
Third, the old system constrains the development of the enterprise The old system is a common issue that restricts China's economy, especially the development of state-owned enterprises. The instrument industry is no exception. A considerable number of state-owned enterprises have been unable to break away from their historical burden due to the long-term constraint of the old system, lost their vitality in the market competition, and suffered a serious downturn in their production and operations. A large number of state-owned enterprises are struggling on the life and death line. Therefore, accelerating institutional reform is one of the important ways for development.
Fourth, the development of the metrology instrumentation industry is constrained by the objective environment. Its main performance is (1) overtaxation. The enterprises for measurement products are generally small in size, with few production batches, and the total output value and economic benefit are not high. However, modern metering instruments and meters have enormous inflating effects on the national economy and produce incalculable double benefits. For industries with such special attributes, 17% of VAT is levied just like other industries, 33% of income tax and the same percentage of tariffs are overtaxed.
(2) The governments at all levels, including the industry's competent authorities and the banking, taxation, and industry and commerce departments, have insufficient understanding of the importance of developing the metrology products industry, and their support is insufficient.
(3) The lack of procurement policies to support the development of national industries.
(4) Poor basic industry capabilities in China. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.
In today's information age, competition in the industry is very fierce. If you slow down the pace of development, you will be left behind. However, the domestic level of metering and instrumentation industry has slowed down, and large and high-end equipment and equipment are almost entirely dependent on imports. Many urgently needed special-purpose instruments are still blank, and there are many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and industrialization is a “bottleneck†that restricts the development of China's metrological instrumentation industry.
China has become the second largest metering instrument and meter producer in Asia except Japan. The general situation of China's metrology and instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of the meter industry. Shangpu consulted the electronics industry analyst pointed out: At present, the development status of China's metering equipment is roughly the complete range, the small scale of the company is inefficient, and the product level is low. The development of China's instrumentation industry lags behind and there are many problems and it is facing a severe situation.
There are three main factors that restrict the development of China's metrological instrumentation industry: First, in today's information age, industry competition is fierce. If you slow down the development rate a bit, you will be left behind. However, the level of China's metrological instrumentation industry has slowed down, and large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special-purpose instruments are still blank, and there are still many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and its industrialization is a bottleneck restricting the development of China's metrological instrumentation industry. Second, China's measurement instruments, although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability are not high. This has greatly limited the scope and credibility of China's metered products. Third, the development of the metrology instrumentation industry has also been constrained by four major objective environments. On the one hand, taxation is too heavy; on the other hand, the relevant departments lack understanding of the importance of the development of measurement products industry, and insufficient support. Third, the lack of procurement policies to support the development of national industries. Fourth, China's basic industry capability is poor. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.
The general situation of the domestic measurement instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of the meter industry. The development of China's metrological instrumentation lags behind, there are many problems, facing a severe situation, and its main factors are concentrated in the following four aspects:
First, the progress of technological innovation and industrialization is slowed down Modern metering is a highly integrated product of optical, mechanical, electrical, computer and many kinds of basic disciplines. It is very sensitive to new technologies and is a new technology application and development in replacement of modern industrial products. One of the most rapid categories is the launch of new products every year. Especially in today's information age, competition is becoming increasingly fierce and a slight slowdown in the pace of development will be far behind. Now that we have entered the 21st century, the general level of China's metrology and instrumentation still remains at the international level in the early 1980s. Large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special instruments and equipment are still blank. There are many difficulties in ensuring quality that need to be overcome. The delay in the development of technological innovation and its industrialization is a "bottleneck" that restricts the development of China's metrological instrumentation industry. There are three main factors constraining the technological innovation and development delay in China's metrological instrumentation industry: The first is that scientific research funding is seriously inadequate; The second is the lack of talent; the third is the lack of effective integration of government, production, education, research, and application.
Second, product stability and reliability can not be a fundamental solution to China's long-term measurement products, including industrial automation instrumentation systems, communications equipment and equipment, although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability not tall. This has greatly limited the scope of use and credibility of China's metrology products. There are three main reasons for this:
(1) The development of basic technology research was neglected for a long time.
(2) The quality of domestically produced common parts and basic parts is not critical.
(3) The quality control and management of the company's products are weak, and the quality of the products is not relevant.
Third, the old system constrains the development of the enterprise The old system is a common issue that restricts China's economy, especially the development of state-owned enterprises. The instrument industry is no exception. A considerable number of state-owned enterprises have been unable to break away from their historical burden due to the long-term constraint of the old system, lost their vitality in the market competition, and suffered a serious downturn in their production and operations. A large number of state-owned enterprises are struggling on the life and death line. Therefore, accelerating institutional reform is one of the important ways for development.
Fourth, the development of the metrology instrumentation industry is constrained by the objective environment. Its main performance is (1) overtaxation. The enterprises for measurement products are generally small in size, with few production batches, and the total output value and economic benefit are not high. However, modern metering instruments and meters have enormous inflating effects on the national economy and produce incalculable double benefits. For industries with such special attributes, 17% of VAT is levied just like other industries, 33% of income tax and the same percentage of tariffs are overtaxed.
(2) The governments at all levels, including the industry's competent authorities and the banking, taxation, and industry and commerce departments, have insufficient understanding of the importance of developing the metrology products industry, and their support is insufficient.
(3) The lack of procurement policies to support the development of national industries.
(4) Poor basic industry capabilities in China. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.
Self-aligning Roller Bearing Ring Grinder
Main USES this series of machine tools is mainly used for groove grinding of Self-aligning roller bearing.1, CNC ac servo control system (PLC or CNC system), color screen display, "man-machine dialogue" and with fault self-diagnosis function.Equipped with electronic pulse handwheel.2. Adopt cross guide rail.3. The work-piece feed pallet and grinding wheel running pallet are driven by servo motor.4. External cylindrical cutting grinding of grinding wheel.5, electromagnetic centerless fixture, remote control control demagnetization controller, in the operation panel to adjust the size of the magnetic force.6. The workpiece shaft adopts sleeve workpiece extraction.Frequency control of motor spee.
Self Aligning Bearing,Self-Aligning Roller Bearing Ring Grinder,Rings Grinding,Aligning Bearing Grinder
Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.boringmachine.nl