Study on Non-in vitro Determination of Leaf Area of ​​Buckwheat

Posted on

Study on Non-in vitro Determination of Leaf Area of ​​Buckwheat
The buckwheat leaves are thin, easy to curl and easily tear, and the non-in vitro rapid assay method is easy to operate without damaging the leaves and the results are accurate.
Materials: Leaves of different varieties of buckwheat varieties such as tartary buckwheat, sweet buckwheat, golden buckwheat, wild winged pheasant, small wild pheasant and hard-bred variegated nymph.
Equipment: Leaf area meter, coordinate paper, ruler, pencil, counter, and small scissors.
The buckwheat leaves are divided into two types. The main shapes of the buckwheat leaves are oval, heart-shaped, triangular and cocoon-shaped. The main shapes of the two types are approximately lancet-shaped heart-shaped and arrow-shaped.
Take 20 to 30 pieces of two types of leaves, spread them on white paper and transparent grid paper, draw a leaf shape, and use a small pair of scissors to cut out the leaf shape on the white paper and measure it with a live leaf area meter. The area is determined by a counter at the same time, and the area of ​​the leaf shape on the clear grid paper is determined. The real area of ​​the leaves is S1, S2,..., Sn respectively.
Take 20-30 pieces of two types of leaves, spread them on a white paper, and use a pencil to hit a point on the white paper at the tip of the blade, and then use a pencil to hit a point on the white paper on the two sides of the blade, that is, three points. A triangle can be determined and the area of ​​the triangle is calculated as ΔS1, ΔS2,... ΔSn.
Calculate the conversion factor K. K=S1+S2+...+Sn/(ΔS1+ΔS2+...+ΔSn)
Analysis of results: By calculating the conversion coefficient, for a class of leaves, the K value is 1.1, the second class leaves, and the K value is 0.9. Therefore, the calculation of the area of ​​the buckwheat leaf is converted into the area of ​​the triangle by conversion and the correlation coefficient is multiplied. Calculate the lancet-shaped heart-shaped and arrow-shaped leaf area, S = 0.9 △ S to calculate the remaining shape of the leaf area, and the above two types of leaf shape easier to distinguish, it can be used to conduct non-isolated rapid determination of buckwheat leaf area.

UHF Heating Equipment

Ultra-high frequency induction heating equipment is a kind of equipment developed for surface quenching by applying electromagnetic induction principle and modern power electronic technology. Surface heat treatment process in which the workpiece is heated locally by an induced current. This heat treatment process is often used for surface quenching, but can also be used for local annealing or tempering, and sometimes for bulk quenching and tempering.
Uhf induction heating equipment adopts IGBT efficacy, soft switching resonant dual control and frequency automatic tracking system, MOSFET devices and unique frequency conversion technology, high frequency operation is stable. Uhf INDUCTION heating equipment with constant current and power control function, greatly optimize the metal heating process. Under the same conditions, it has 50% energy saving compared with the traditional high cycle electron tube heating equipment, no high cycle radiation, no high cycle drying. Reduced power load and power capacity, with 100% full load design, UHF induction heating equipment can work continuously for 24 hours without interruption. With automatic heating, insulation, cooling three periods of function Settings, is conducive to improve the heating quality of UHF induction heating equipment, simplified manual operation. Uhf induction heating equipment can be selected according to the power and frequency. The higher the high frequency, the shallower the heating depth, and the lower the high frequency, the better the diathermy. Induction heater 1 ~ 20KHZ high frequency automatic tracking.
UHF heating equipment has the advantages of high frequency, small size, light weight, energy saving, solid and beautiful solder joints, almost unlimited welding part shape, surface pattern will not be damaged, the metal internal crystal structure unchanged, small annealing range and so on. , no obvious welding scar, widely used in metal glass manufacturing, electrical and electronic industry connector welding, small relay internal non-contact welding, refrigeration industry high pressure welding, jewelry industry parts welding, manufacturing metal jewelry and process welding.

UHF,UHF Heater,Ultra High Frequency,UHF Heating Equipment

Ningbo Yufeng Electronics Co., Ltd , https://www.yufengheating.com