Six Interlaced Detection Regions Walk Through Metal Detector

                     Six interlaced detection regions Walk Through Metal Detector 


Model JKDM-200, is economical, practical and cheap, mainly match moderate detection requirement places such as night-clubs or entertainment location. With body height detection design and built-in electromagnetic fields, metal items carried by human can generated through the alarm device, items like various control tools, weapons, metal products, electronic products and other items containing metal and so on, as an effective anti-theft examination tool.

Features

1. Six interlaced detection regions of the same high with the body and combining,
2. LED alarm light on column, displaying the area of metal detected accurately.
3. Four pairs of infrared emission and the receiver to prevent detection blind spot.
4. 100% Ferrous & non-ferrous metal detect.
5. With aluminum alloy binding tape, up to 99% non-condensing
6. Using microprocessor digital control technology, anti-interference ability,
7. Each region has 100 adjustable sensitivity, in accordance with the requirements in the 0-99 arbitrary regulation,
    and gets rid of the interference of belt, zippers and other objects.
8. Pass-through number and the alarm frequency can be counted automatically.
9. Can be used independently, or several detection doors net work (minimum spacing of up to 40CM)to meet
    the flow requirements of pass through.
10. Password protection function:  to prevent non-authorized personnel to amend the parameters.
11. Assembled structure: easy installation. User-friendly diagnostics identify fault condition,
12. Standard: "GB 15210-1994. Through type metal detector door general technical conditions" national
      standards Basic safety, meeting the requirements of GB4793.and program to be store in nonvolatile
      memory. Comply with IP2(60529). Personal safety: Satisfied NILECJ-0601.
13. EMC electromagnetic radiation in line with the standards: comply EN60950,no harm to the wearers of heart
      pacemakers, pregnant women, film and magnetic recording materials.

Specifications                      Six interlaced detection regions Walk Through Metal Detector 


Model JKDM-200, is economical, practical and cheap, mainly match moderate detection requirement places such as night-clubs or entertainment location. With body height detection design and built-in electromagnetic fields, metal items carried by human can generated through the alarm device, items like various control tools, weapons, metal products, electronic products and other items containing metal and so on, as an effective anti-theft examination tool.

Features

1. Six interlaced detection regions of the same high with the body and combining,
2. LED alarm light on column, displaying the area of metal detected accurately.
3. Four pairs of infrared emission and the receiver to prevent detection blind spot.
4. 100% Ferrous & non-ferrous metal detect.
5. With aluminum alloy binding tape, up to 99% non-condensing
6. Using microprocessor digital control technology, anti-interference ability,
7. Each region has 100 adjustable sensitivity, in accordance with the requirements in the 0-99 arbitrary regulation,
    and gets rid of the interference of belt, zippers and other objects.
8. Pass-through number and the alarm frequency can be counted automatically.
9. Can be used independently, or several detection doors net work (minimum spacing of up to 40CM)to meet
    the flow requirements of pass through.
10. Password protection function:  to prevent non-authorized personnel to amend the parameters.
11. Assembled structure: easy installation. User-friendly diagnostics identify fault condition,
12. Standard: "GB 15210-1994. Through type metal detector door general technical conditions" national
      standards Basic safety, meeting the requirements of GB4793.and program to be store in nonvolatile
      memory. Comply with IP2(60529). Personal safety: Satisfied NILECJ-0601.
13. EMC electromagnetic radiation in line with the standards: comply EN60950,no harm to the wearers of heart
      pacemakers, pregnant women, film and magnetic recording materials.

Specifications

Spray Wires

Thermal spray wires are used in thermal spraying processes, which involve the application of a coating material onto a surface. These wires are specifically designed to be melted and sprayed onto a substrate to create a protective or functional coating.

Thermal spray wires are typically made from materials such as metals, alloys, or ceramics. They are available in various diameters and compositions to suit different applications and requirements. The wire is fed into a thermal spray gun, where it is heated to a molten state and propelled onto the surface being coated.

Spray Wires,Arc Spray Coating,Thermal Arc Spray,Thermal Spray Wire

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com