Routine maintenance of fiber laser marking machine precautions

Fiber laser marking machines use laser beams to mark permanent surfaces of various substances. The effect of marking is to burn off some substances through light energy, showing various patterns such as patterns, characters, and bar codes to be etched; or to expose deep layers through the evaporation of surface materials; or to cause surface materials through light energy. Chemical and physical changes and "inscribed" traces.
As the most advanced laser marking device, fiber laser marking machine has the characteristics of high speed, good beam quality, small size, long working life, flexible installation and maintenance-free. Fiber laser marking machine is suitable for metal (including rare metals), engineering plastics, electroplating materials, plastics, rubber, epoxy resin, ceramics and other materials graphics and text marking, and mass production line operations, widely used in electronic components, mobile phones Buttons, plastic translucent buttons, electrical appliances, auto parts, communications products, jewelry, watches and clocks, stainless steel products and other industries.
We should pay attention to the following points when using fiber laser marking machines and routine maintenance:
(1) When the light pen is working, it cannot contact or collide with the movable beam of the scanning table;
(2) The laser and optical lens are fragile and should be handled with care and avoid vibration.
(3) When there is a fault in the machine, the work should be stopped immediately and handled by professional staff;
(4) It is forbidden to start the laser power under the condition that the water or water circulation is not normal;
(5) pay attention to the order of the switch, in the shutdown must adjust the current to about 5A;
(6) Note that the width of the marking machine must not exceed the working width;
(7) Pay attention to keep the interior and machine surface tidy and clean;
(8) Pay attention to keep the inner circulation water clean, clean the water tank regularly and change the deionized water or pure water.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /

Juicers

Juicers are machines that can quickly squeeze fruit and vegetable into juices. Juicers including Power Juicers, Slow Juicers and citrus juiers. The working principle of the juicer is to start the machine so that the motor drives the knife net to rotate at a high speed, pushing the fruits and vegetables from the feeding port to the knife net, and the spike of the knife net will cut the fruit and vegetables. Under the action of the centrifugal force, juicer produced by the high speed operation of the knife net, the pomace flies out of the knife net into the slag box, and the juice penetrates the knife net into the juice cup.

Power juicers

Juicers,Juicer Machine,Slow Juicer,Juice Extractor,Electric Juicers

Flying Electronic Co., Ltd , https://www.jmflyingelectronic.com