Red Star Flotation Machine is suitable for sorting of colored ferrous metals

Red Star Flotation Machine is suitable for sorting of colored ferrous metals

The structure of the stone breaker consists of a frame, an eccentric shaft, a large pulley, a flywheel, a movable jaw, a side guard, a bracket, a bracket, a backscrew, a return spring, a fixed jaw, and a movable jaw. The elbow also plays an insurance role. This series of broken stone crushing method for the dynamic extrusion type, motor-driven belts and pulleys, through the eccentric shaft to move up and down movement, when the dynamic pick up when the angle between the elbow and moving jaw becomes larger, thus pushing the dynamic board When the jaws are approached, the material is squeezed, twisted and milled. When the jaws move downward, the angle between the elbow and the jaw becomes smaller, and the jaw moves away under the action of the tie rod and the spring. The seesaw, at this time the broken material is discharged from the lower end of the crushing chamber, and the motor is continuously broken and crushed for periodic crushing and discharging to achieve mass production. Flotation machine is suitable for the selection of colored ferrous metals, but also for the selection of non-metals such as coal, fluorite and talc.

The flotation machine is driven by the motor triangle drive to rotate the impeller to generate centrifugal force to form a negative pressure. On the one hand, it inhales enough air to mix with the pulp. On the other hand, the slurry is mixed with the drug and the foam is refined to make the mineral bonded foam. , float to the pulp surface to form a mineralized foam. Adjust the height of the gate and control the liquid level so that the useful foam is scraped by the scraper. It consists of a duct inlet pipe. When the impeller rotates, a negative pressure is generated in the impeller chamber, air is sucked through the hollow pump pipe, and dispersed in the slurry to form a bubble group. The slurry with a large number of bubbles is rotated by the impeller. It was quickly thrown to the stator to further refine the bubbles in the pulp and eliminate the rotating motion of the pulp flow in the flotation cell, resulting in a large number of vertically rising microbubbles, providing the necessary conditions for the flotation process.