In view of the potential slowdown in economic growth next year, industrial investment and mergers and acquisitions, or negative growth, on November 7th, China Petroleum and Chemical Industry Co., Ltd. held the 6th China Plastics Industry Development (International) Forum 2010 in Yuyao, Zhejiang Province. Pan Derun, director of the Industrial Union's Advisory Committee, pointed out that as an important part of the new materials industry, the market prospect of the plastics industry is still very attractive. It will increase industrial concentration and enhance the strength of enterprises, especially the strength of technology research and development, for the sustainable development of the plastics industry. It is of great significance that green and low carbon are the only way for industrial development.
Pan Derun pointed out that as an important part of the new materials industry, plastics are not only among them, but also inseparable with other emerging industries. In particular, engineering plastics are the leading products of new plastic materials. The future development space is even wider. It is expected that the “12th Five-Year Plan†period will face rare opportunities for development. However, he also believes that although China's plastics industry is showing a trend of both sales and sales, the lack of innovation in the industry leads to low profit margins, insufficient investment in industry technology and scientific research, and insufficient incentive for follow-up development, especially in the plastics industry. 0.38% of the total industry income is very different from the international investment of 3%.
Ma Zhanfeng, secretary-general of the China Plastics Processing Industry Association, also stated that the plastics industry has maintained a growth rate faster than that of the national economy. This year, the demand squeeze of the international financial crisis was released and production and sales performed well. It is estimated that the annual output of plastic products will exceed 50 million tons, and the growth will be above 18%, far higher than the growth of approximately 10% in 2008 and 2009. If there is no accident, the "Eleventh Five-Year Plan" will be put to a successful conclusion this year.
Ma Zhanfeng believes that in the current situation, plastics companies must increase their profit margins. In addition to increasing the technological content of products, they should also follow the path of energy efficiency. In general, the cost of electricity for plastics processing companies accounts for about 30% to 50% of the total cost of the product. If the electricity consumption is reduced, the cost of production will be greatly reduced and the competitiveness of enterprises will be improved. At present, the size of plastics processing companies is generally small. Affected by the level of technology and funds, it is more difficult for individual enterprises to significantly increase their energy saving and emission reduction levels. To this end, China Plastics Industry Association is actively promoting contract energy management projects for plastics processing companies. It hopes to integrate a group of SMEs into energy-saving projects. This will significantly reduce the threshold of energy-saving and emission reduction for enterprises, thus improving the overall energy-saving of the plastics processing industry. Level.
Pan Derun pointed out that as an important part of the new materials industry, plastics are not only among them, but also inseparable with other emerging industries. In particular, engineering plastics are the leading products of new plastic materials. The future development space is even wider. It is expected that the “12th Five-Year Plan†period will face rare opportunities for development. However, he also believes that although China's plastics industry is showing a trend of both sales and sales, the lack of innovation in the industry leads to low profit margins, insufficient investment in industry technology and scientific research, and insufficient incentive for follow-up development, especially in the plastics industry. 0.38% of the total industry income is very different from the international investment of 3%.
Ma Zhanfeng, secretary-general of the China Plastics Processing Industry Association, also stated that the plastics industry has maintained a growth rate faster than that of the national economy. This year, the demand squeeze of the international financial crisis was released and production and sales performed well. It is estimated that the annual output of plastic products will exceed 50 million tons, and the growth will be above 18%, far higher than the growth of approximately 10% in 2008 and 2009. If there is no accident, the "Eleventh Five-Year Plan" will be put to a successful conclusion this year.
Ma Zhanfeng believes that in the current situation, plastics companies must increase their profit margins. In addition to increasing the technological content of products, they should also follow the path of energy efficiency. In general, the cost of electricity for plastics processing companies accounts for about 30% to 50% of the total cost of the product. If the electricity consumption is reduced, the cost of production will be greatly reduced and the competitiveness of enterprises will be improved. At present, the size of plastics processing companies is generally small. Affected by the level of technology and funds, it is more difficult for individual enterprises to significantly increase their energy saving and emission reduction levels. To this end, China Plastics Industry Association is actively promoting contract energy management projects for plastics processing companies. It hopes to integrate a group of SMEs into energy-saving projects. This will significantly reduce the threshold of energy-saving and emission reduction for enterprises, thus improving the overall energy-saving of the plastics processing industry. Level.
Wiregate Carabiners,Strongest Carabiner,Best Wiregate Carabiner,Oval Wire Gate Carabine
Ningbo Watower Outdoor CO.,LTD , https://www.esygoing.com