The beneficiation method of molybdenum ore is mainly flotation, and the recovered molybdenum mineral is molybdenite. Sometimes in order to improve the quality of molybdenum concentrate, remove impurities, and then carry out chemical beneficiation of molybdenum concentrate.
The molybdenite crystal is a hexagonal layered or plate-like structure formed by the S-Mo-S structure along the interlayer of Fanshijian and the polar covalent bond S-Mo in the layer. The bond between the layers is weak, and the covalent bond bonding within the layer is very strong. Therefore molybdenite easily disintegrate the layer structure between in the form of sheet or plate output, which is the natural floatability Hui copper ore good reason. Practice has proved that under suitable grinding fineness, the molybdenite crystal dissociation occurs between the S-Mo-S layers, and the hydrophilic S-Mo surface accounts for a small proportion. However, when over-grinding, the proportion of S-Mo surface increases, and the floatability decreases. Although a certain amount of polar collector such as xanthate is added at this time, it is beneficial to the recovery of molybdenum ore, but the new slime produced by over-grinding Affect the flotation effect. Therefore, the selection of molybdenite should avoid and prevent over-grinding. In the production, it is necessary to adopt segmental grinding and multi-stage sorting process to gradually achieve monomer dissociation and ensure high recovery of molybdenum concentrate.
The crushing of molybdenum ore generally adopts a three-stage and one-closed process, and the final product has a particle size of 12 to 15 mm.
Grinding is usually carried out using a ball mill or a rod mill-ball milling process. Henderson is the only semi-self-grinding process. Flotation uses the preferred flotation method. Rough selection of molybdenum coarse concentrates, coarse sweeping of tailings to recover associated minerals or disposal. The molybdenum coarse concentrate is re-milled in two or three stages, and the final molybdenum concentrate is obtained in four or five times.
The flotation agent of molybdenum ore uses a non-polar oil as a collector while adding a foaming agent. Surfactant Syntex is used as an oil emulsifier in the United States and Canada. The nature of the ore, as modifier with lime, sodium silicate gangue as inhibitors, sometimes add cyanide or sulfide minerals inhibit other heavy metals.
In order to ensure the quality of molybdenum concentrate, heavy metal minerals such as copper, lead and iron contained in molybdenum concentrate, calcium oxide and carbonaceous minerals need to be further separated:
Typically using sodium sulfide or sodium hydrosulfide, cyanide or copper and iron ferricyanide system; inhibition by weight of lead chromate or Knox (Nokes). If an inhibitor is used, the impurity content does not reach the quality standard, and it needs to be supplemented by chemical beneficiation: secondary copper sulfide is leached with cyanide; chalcopyrite is leached with ferric chloride solution; galena with hydrochloric acid and trichloro The leaching of the iron solution can reach the standard content.
The gangue containing calcium oxide is easily muddy, so it is not necessary to over-grind the ore containing such gangue. Production is often added sodium silicate, sodium hexametaphosphate or an organic phosphate gel as gangue inhibitor or dispersant; Activated carbon can also be added CMC (carboxymethylcellulose) inhibition carbonate gangue. Finally, it can be leached by hydrochloric acid or hydrochloric acid plus ferric chloride solution.
For the separation of carbonaceous minerals, it is first necessary to find out that the carbonaceous material is graphite , asphalt or coal . The floatability of these carbonaceous minerals is similar to that of molybdenum ore, but the density is small, and it can generally be removed by re-election; using hexapoly-sodium metaphosphate and CMC to suppress molybdenum float; or adding ferric chloride or water glass It is also effective to inhibit carbonaceous material with sodium hexametaphosphate; it is also one of the methods to remove organic carbon by roasting. It should be noted that the separation of all these carbonaceous minerals is currently unsatisfactory and is still a problem that has not yet been fully resolved.
The SiO 2 (silica) content in the gangue is too high, often affecting the grade of molybdenum concentrate. It has been determined that the SiO 2 content decreases with the increase of the grade of molybdenum concentrate, and the two have a tendency to consume each other. As long as the molybdenum mineral reaches the monomer dissociation fineness, the SiO 2 content can generally fall below the standard. Adding activated carbon to the oil on the molybdenum surface, and adding CMC to inhibit the silicate gangue, the SiO 2 content can also be reduced below the standard.
The emergency room should have an independent consultation area with separate entrances and exits and clear emergency signs, so that patients can clearly find the triage area for consultation. The emergency department should be open for consultation 24 hours a day for easy management. While ensuring medical functionality, it is also important to consider the psychological needs of patients and medical staff, and strive to create a convenient, efficient, comfortable, and warm treatment environment.
Jilin HaoChen cleaning Engineering Technology Co., Ltd. is a technological innovation enterprise focusing on the pharmaceutical purification engineering industry. The enterprise has a superb purification engineering technical team and excellent construction force. The company has always pursued the service tenet of "safety first, quality-oriented, customer first and technology first". Many representative air purification projects have been established in Jilin Province, Heilongjiang Province, Liaoning Province and Inner Mongolia Autonomous Region. With a registered capital of 5.8 million yuan, the company has grade II qualification for professional contracting of Building Decoration Engineering; Grade II qualification for professional contracting of building electromechanical installation engineering.
Service Items:
Purification project of pharmaceutical clean workshop (pharmaceutical purification workshop, food purification workshop, electronic and chemical purification workshop, etc.)
Construction of purification operating room (hybrid integrated operating room, DSA operating room, laminar flow purification operating room, ordinary purification operating room, etc.)
Construction of ultra clean laboratory (Microbiology Laboratory, sterility laboratory, PCR laboratory, physical and chemical laboratory, P1, P2, P3 laboratory, etc.)
Construction of SPF animal feeding room purification project
Business items: medical purification color steel plate, supporting purification profile, air purification ventilation equipment, purification engineering supporting equipment, etc
At present, the company has 8 sets (pieces) of various large and medium-sized mechanical equipment, the original value of mechanical purification equipment is 4.6 million yuan, and the net value of mechanical purification equipment is 2.3 million yuan. The total annual construction output value is about 10 million yuan. Our company has 24 registered employees. Among them, there are 15 personnel with professional titles, 7 engineering technicians, 3 senior engineers, 5 engineers and 7 assistant engineers; 2 persons with economic management titles.
Morality first, customers first, safety first and economy first!
We look forward to working with you.
Fever Clinic Emergency Room,Fever Temperature Emergency Room,Fever Emergency Room,Fever Child Emergency Room
Jilin HaoChen cleaning Engineering Technology Co., Ltd , https://www.hccoalgas.com