Pang Qinghua, chairman of the giant group, said in the speech of the conference that the high-speed growth of the automotive industry is called “crazy years, crazy industries, crazy peopleâ€, “What is crazy? It's abnormal, it's crazy. The eyes of a car buyer. Nothing is wrong, selling cars adds money to sell." “That era has no longer existed.†“Every leader and employee must think about a problem: how can we develop, how can we complete the second venture, and what methods can we use to cope with the current situation?â€
Also a month ago, Deloitte & Touche released “Investigation Report on China's 2012 Car Dealer Risk Status†(hereinafter referred to as “Reportâ€): Chinese auto dealers are vulnerable to market risk and have a high degree of dependence on new car sales. 92% of revenue comes from new car sales. The mature market's income structure is more balanced: 55% comes from new car sales, 32% from used car sales, and 13% from parts and after-sales services. Chinese car dealers have opportunities in diversifying their income structure and obtaining higher profits, such as only 4% for new cars and 12% for second-hand cars.
The report pointed out: Over 35% of excess capacity has brought great pressure on Chinese distributors. According to preliminary estimates, by the year 2015, the production capacity of the top 30 original equipment manufacturers in China will reach approximately 40 million vehicles, which greatly exceeds the optimistic estimate for car sales. Nearly half (48%) of the surveyed dealers’ inventory turnover days exceeded the current industry benchmark of 45-60 days.
The actual situation may be even worse. Pang Qinghua said: "Inventory has been more than 3 months, and it is still pressing down. The profits have been crushed, and on the consumer side, no one wants to buy a car three months ago."
Dealers complained about manufacturers' pressrooms. Actually, the madness of manufacturers also fueled dealers. Dealers hope that manufacturers will continue to speed up the introduction of more new cars, which makes the market full of old cars that change their face, and the so-called "generational generation" phenomenon. Behind it, it shows that the market life cycle of old products is far from over. Some manufacturers have not been able to keep up with the crazy rhythm and are very hard in the competition. One of the results of the new car's rapid pace of launch is that the dazzling new car will soon become "stars of the last night" and will accumulate in the warehouse.
There are also problems with anti-corruption within the manufacturers and dealers. For example, the case of “Static Country Pines†reveals the chaos of the internal management of state-owned groups and results in the massive loss of state-owned assets. Many car dealerships are private enterprises, but they are also facing urgent issues to strengthen internal management. The gigantic Group Discipline Inspection pointed out: “The violation of regulations by the regulators violates the law and constitutes a threat to the company’s safetyâ€, violates the approval procedures for doing business, does not adequately supervise construction projects, and has internal management loopholes, resulting in an increase in the internal case rate.
Someone predicts that dealers will face reshuffle, which is bound to happen. The ones that have been washed out are definitely dealers who do not have good transformation and internal management confusion.
Therefore, in the face of the new situation, dealers should seriously change their concepts, shift their work focus to service, explore more service areas, and do a good job of after-sales services. Pang Qinghua put forward the slogan of building service-oriented and innovative companies, and the sales and lending model of automobile sales it creates is inspiring for the future development of dealers.
Gantry Flame CNC Cutting Machine
Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry flame plasma CNC cutting machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.
Product parameters
Type |
BLDH-3060 |
BLDH-4080 |
BLDH-5080 |
BLDH-60100 |
BLDH-80100 |
Track gauge(mm) |
3000 |
4035 |
5000 |
6000 |
8000 |
Effective cutting width(mm) |
2300 |
3300 |
4300 |
5300 |
7300 |
Machine width(mm) |
3500 |
4300 |
5500 |
6500 |
8500 |
Track length(mm) |
6000 |
8000 |
8000 |
10000 |
10000 |
Number of standard cutting torch(set) |
1 |
2 |
2 |
2 |
2 |
Input power |
AC380V/50Hz;AC220V/50Hz |
||||
Lift(mm) |
200 |
||||
Cutting thickness(mm) |
Flame cutting:5-150 Plasma cutting:1-30(According to the power supply size) |
||||
Cutting speed (mm/min) |
Flame cutting:100-1000 Plasma cutting:450-5000 |
||||
Idle speed |
0-8000 |
||||
Drive mode |
Bilateral drive |
||||
System |
Shanghai Jiaoda or Beijing Starfire |
||||
Operating accurancy |
±0.5mm |
According to the power supply size |
|||||||
LGK-120IGBT |
LGK-200IGBT. |
||||||
No. |
Name |
Specification parameter |
Rrmark |
Specification parameter |
Rrmark |
||
1 |
Track gauge |
4.0m |
Transverse efffective cutting max. 3 m |
4.0m |
Transverse efffective cutting max. 3 m |
||
2 |
Track length |
8.0m |
longitudinal efffective cutting max. 6.5 m |
8.0m |
longitudinal efffective cutting max. 6.5 m |
||
3 |
Max. idle speed |
9000min |
|
9000mm/min |
|
||
4 |
Straight line position accuracy |
±0.2min |
|
±0.2mm |
|
||
5 |
Straight line position repeat accuracy |
±0.3mm |
|
±0.3mm |
|
||
6 |
Operating accurancy |
±0.5mm |
|
±0.5mm |
|
||
7 |
Height controller lift distance |
200mm |
|
150mm |
|
||
8 |
Flame punch cutting thickness |
6-80mm |
Carbon steel plate |
6-80mm |
Carbon steel plate |
||
9 |
Flama max. Cutting thickness |
200mm |
Carbon steel plate |
200mm |
Carbon steel plate |
||
10 |
Plasma punch cutting thickness |
16mm |
Stainless steel plate, carbon steel plate |
25mm |
Stainless steel plate, carbon steel plate |
||
11 |
Plasma max. Cutting thickness (Edge cutting) |
25mm |
Stainless steel plate, carbon steel plate |
40mm |
Stainless steel plate, carbon steel plate |
||
12 |
Inclination of plasma cutting surface |
5-8° (carbon steel plate) |
5-8°(carbon steel plate) |
|
|||
13 |
Roughness of plasma surface |
Ra12.5 |
Ra12.5 |
|
|||
14 |
Roughness of flame surface |
Ra25 |
Ra25 |
|
|||
15 |
Speed of plasma cutting |
50-4000mm/min |
50-4000mm/min |
|
|||
16 |
Speed of flame cutting |
50-700mm/min |
50-700mm/min |
|
|||
17 |
Drive mode |
Bilateral drive |
Bilateral drive (panasonic servo) |
|
|||
18 |
Number of cutting torch |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
CNC flame cutting torch: 1, plasma cutting torch: 1 |
|
|||
19 |
Equipment accurancy |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
Conformed or superior to ISO8206-1991, JB/T10045.3-1999 |
|
|||
Flame plasma CNC cutting machine
Basic Equipment
No. |
Name |
Distribution |
Unit |
Quantity |
Remark |
1 |
Type specification |
BLDH4080 |
set |
1 |
Beam annealing |
2 |
Drive mode |
double-drive |
set |
2 |
Panasonic servo |
3 |
Drive reducer |
AEVELE |
set |
2 |
Taiwan |
4 |
CNC |
F2300TB |
set |
1 |
Shanghai Jiaoda |
5 |
FASTCAM |
Fast CAM Chinese version |
set |
1 |
Guoyou |
6 |
Flame cutting torch |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
7 |
Plasma power |
Chengdu Huayuan LGK200 |
set |
1 |
Huayuan |
8 |
Arc voltage regulator |
Shanghai Jiaoda |
set |
1 |
system-provided |
9 |
Automatic ignite device |
Wuxi Xiangzheng |
set |
1 |
Guoyou |
10 |
Precision track |
24 kg |
m |
8*2 |
Wuxi |
11 |
Precision rack |
Straight tooth |
m |
6*2 |
Wuxi |
12 |
Pulley |
Nylon chain |
set |
1 |
|
13 |
Lift body |
2K2M |
piece |
2 |
|
Technical requriments
No. |
Name |
Distribution |
Remark |
1 |
Width of machine tool |
4000 |
|
2 |
Effective cutting wideth |
3100 |
|
3 |
Track gauge |
3710 |
|
4 |
Idle speed |
0~8000 mm |
|
5 |
Flame cutting thickness |
5~200 mm |
|
6 |
Plasma punch cutting thickness |
25mm |
user demand |
|
Plasma max. Cutting thickness |
45mm |
user demand |
7 |
Effective length |
6500 mm |
|
8 |
Cutting torch journey |
≤150 mm |
|
9 |
Accurancy |
± 0.5 mm |
|
10 |
Track length |
8m |
|
11 |
Input power |
AC220V/380V 50HZ |
|
12 |
automatic height-adjustment |
Jiaoda arc voltage height-adjustment |
|
13 |
Cutting material |
Stainless steel plate, carbon steel plate |
|
Cutting samples
Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com