High Speed High Precision Silicon Steel Cut to Length Line

Model NO.: JTXE-600
PLC: Mitsubishi, or Siemens
Certificate: ISO
Warranty: 1 Year
After-Sell Service: Yes
Trademark: XIEER
Transport Package: Seaworthy Packing
Origin: Jiangyin
HS Code: 84623920
JTXE-600 Electric Reactor Silicon Steel Cut to Length Line

Cut to Length Line Process Introduction
The reactor silicon steel cutting line can be used for the automatic production of the chip type, and adopts the imported servo control technology, fast speed, lower noise and long life. This equipment is a mechanic photoelectric high-tech product, representing the high standard of domestic silicon steel sheet traverse cutting devices.

Cut to Length Line Equipment Composition

1,Guiding Device
a)Using the vertical roller of both sides, it is easy to enter the device of measuring rod
b)The guide roller on both sides is adjusted by hand screw,the guide roller is mounted on a linear guide,two rolls of rubber roller are on the feeding side.
c)Width range:25-400mm

2,Servo Control Setting Device
a)roller  structure
b)The equipment is composed of a fixed foot roll, servo motor, synchronous belt gear reducer, base and so on
c)pinch-roll for determining length:two,down roll is Gcr15 alloy steel,after the adjustment, quenching, grinding and polishing,upper roller outer round polyurethane.
d)control:PLC
e)driving power:Taida AC2.0KW servo motor,the corresponding driver controller is matched.
f)Upper roller can be manually driven up and down.

3,High Speed Servo Drive Shears
a)
The equipment is a device that can be cut off with a quick cut according to instructions
b)cutting way:the cutting mode is driven by the servo motor driven by the crankshaft, which is cut from the top downwards, and the shear speed is determined by the motor speed.
c)Blade material:hard alloy. blade hardness:HRC88-90
d)composition:it is mainly composed of wallboard, upper and lower knife-edge and blade, guiding mechanism, crankshaft, servo motor and transmission mechanism.
e)drive motor:Taida AC2.0KW servo motor,the corresponding driver controller is matched.

Electric Reactor Silicon Steel Strip Picture
High Speed High Precision Silicon Steel Cut to Length LineParameters
1,High Speed High Precision Slitting Line
Model Name JT1250
Cutting Thickness(mm) 0.23-0.5
Cutting Width(mm) 40-1200
Coil Weight(t) 5
Feeding Speed(m/min) 80-120
Straightness Deviation of Each Edge(mm/m) 0.1
Cutting Angle Accuracy DEG ±0.025
Band Width Accuracy(mm) ±0.1
Total Motor Power(KW) 55

2,Precision high speed cut-to-length linenonstop cutting
Two cutting two punching(ordinary type)
Model Name JTXE-LL-300 JTXE-LL-400
Cutting Thickness(mm) 0.23-0.35 0.23-0.35
Cutting Width(mm) 40-300 40-400
Cutting Length(mm) 350-9999 350-9999
Feeding Speed(m/min) 180 180
Cutting Burr(mm) ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.1 ±0.1
Total Motor Power(KW) 15 16.5

Two cutting two punching(step type)
Model Name JTXE-LL-300Z JTXE-LL-400Z
Cutting Thickness(mm) 0.23-0.35 0.23-0.35
Cutting Width(mm) 40-300 40-400
Cutting Length(mm) 350-9999 350-9999
Feeding Speed(m/min) 180 180
Cutting Burr(mm) ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.1 ±0.1
Total Motor Power(KW) 20 21.5

Two cutting two punching(centralized positioning)
Model Name JTXE-LL-400ZX JTXE-LL-600ZX
Cutting Thickness(mm) 0.23-0.35 0.23-0.35
Cutting Width(mm) 40-400 60-600
Cutting Length(mm) 350-9999 350-9999
Feeding Speed(m/min) 180 180
Cutting Burr(mm) ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.1 ±0.1
Total Motor Power(KW) 24 26

3,Precision high speed cut-to-length linenonstop cutting
Two cutting one punching
Model Name JTXE-X-300 JTXE-X-400 JTXE-X-600
Cutting Thickness(mm) 0.23-0.35 0.23-0.35 0.23-0.35
Cutting Width(mm) 40-300 40-400 60-600
Cutting Length(mm) 350-9999 350-9999 350-9999
Feeding Speed(m/min) 180 180 180
Cutting Burr(mm) ≤0.02 ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.1 ±0.1 ±0.1
Total Motor Power(KW) 12 13.5 13.5

4,Center Post Silicon Steel Cut to Length Line(step type)
Model Name JTXE-ZZ-300Z JTXE-ZZ-400Z
Cutting Thickness(mm) 0.23-0.35 0.23-0.35
Cutting Width(mm) 40-300 40-400
Cutting Length(mm) 150-9999 150-9999
Feeding Speed(m/min) 180 180
Cutting Burr(mm) ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.1 ±0.1
Total Motor Power(KW) 14 14


5,Electric Reactor Silicon Steel Cut to Length Line
Model Name JTXE-300 JTXE-400 JTXE-600
Cutting Thickness(mm) 0.23-0.5 0.23-0.5 0.23-0.5
Cutting Width(mm) 40-300 40-400 40-600
Cutting Length(mm) 10-9999 10-9999 10-9999
Feeding Speed(m/min) 180 180 180
Cutting Burr(mm) ≤0.02 ≤0.02 ≤0.02
Cutting Angle Accuracy DEG ±0.025 ±0.025 ±0.025
Cutting Length Accuracy(mm) ±0.05 ±0.05 ±0.05
Total Motor Power(KW) 10 10 12


Electric Reactor Silicon Steel Cut to Length Line Working Process
High Speed High Precision Silicon Steel Cut to Length Line
High Speed High Precision Silicon Steel Cut to Length Line
High Speed High Precision Silicon Steel Cut to Length Line

Cut to Length Line Certificate
High Speed High Precision Silicon Steel Cut to Length Line



Cut to Length Line Packaging
High Speed High Precision Silicon Steel Cut to Length Line






 

NPK Water Soluble Fertilizer

NPK Water Soluble Fertilizer is a pure nutrient and full water soluble fertilizer which is suitable for various plants.It can supply N,P,K for crops in different period to increase yields. It`s hormone free, chlorine free, contains EDTA micro elements with high & long efficiency.

NPK Water Soluble Fertilizer

Appearance

Powder

Item

Standard

Result

Nitrogen Content

30±1.5%

30.15%

Phosphorus Content

10±1.5%

10.6%

Potassium Content

10±1.5%

10.1%

Total Content(N+P2O5+K2O)

50% Min

50.85%

Moisture

1.5% Max

1%


Customized fertilizers can be provided.Formula and color and packing can be customized

1. NPK water soluble fertilizer is suitable for a variety of vegetables, fruit trees,flowers,and field crops.

2. Fully water soluble,widely used for drip irrigation,flood irrigation,foliar spray and soilless culture.

3. It is a quick effective fertilizer. A remarkable effect will be showed within 1~2days after being sprinkled on the surface of the leaves.


Npk Water Soluble Fertilizer,Water Soluble Fertilizer Npk,Water Soluble Npk Fertilizer,Foliar Npk Water Soluble Fertilizer

Hebei Woldi Trading Co.,LTD , https://www.woldiexport.com