High Efficiency Heavy Duty Electric Self Priming Chemical Oil Pump

High Efficency dry priming Self Priming water Pump /suction head up to 9.5m

Operation Parameter 
Application Fields
Municipal, construction, ports
Chemical industry, paper making, paper pulp industry
Mining and metallurgy; 
Fire control
Environmental protection

Advanced production process

Advantage have to say for High Efficency dry priming Self Priming water Pump
1. High self-priming performance: 
Suction head reach to 9.5 m
Synchronous Dry priming
The suction head is more than normal self-priming pump

2. Quick start and restart: 
No need feeding water before start, first start is the same way. 
Reduce the site work

3. Efficiency ≥80%, save running cost, your Energy-efficient in all pump life. 

4. Pass the solid particles up to 75 mm, sensible choice under various working condition. 
Due to pass the large diameter solid particles, so this SPH pumps are suitable for deep. 

5. Flange standard: GB, HG, DIN, ANSI standard, according to your requirements. 

6. A variety of material to choose
Cast iron/ stainless steel/ steel/ Ductile iron/ Duplex stainless steel
Shaft seal: Mechanical seal / packing seal

7. Save installation place, low noise, easy maintenance
Compact structure, SPH series High efficiency energy-save self priming motor pump. Pump casing and the suction device is compact; Save the installation place. The pump running with stable operation, and low noise. The pump assembly by the high concentricity components. Use the IEC standard motor directly connected. Don't remove the pump casing change the parts of pumps and very easy to make the maintenance. 

Oil Field Well point Dewatering Project

General Introduction
SPH series High efficiency energy-save self priming motor pums are joint designed by DRAKOS PUMP Singapore and REEOFLO of Germany company. It is big different from the traditional multiple faults: Self-priming pump unique dry running structure, can fast automatic startup and restart, start for the first time without feeding liquid. Self-priming height can be 9.5m; Excellent hydraulic design and unique structure and keep the strong self priming with higher efficiency than traditional self-priming pump over 20%. 
SPH series high efficiency self-priming pumping is usually drive by motor. This series of pump can transport all kinds of used for Pure, slightly polluted and gressive liquid with a viscosity of up to 150 mm²/s, solid particles less than 75 mm. 
High Efficency dry priming Self Priming water Pump /suction head up to 9.5m

Operation Parameter 
Application Fields
Municipal, construction, ports
Chemical industry, paper making, paper pulp industry
Mining and metallurgy; 
Fire control
Environmental protection

Advanced production process

Advantage have to say for High Efficency dry priming Self Priming water Pump
1. High self-priming performance: 
Suction head reach to 9.5 m
Synchronous Dry priming
The suction head is more than normal self-priming pump

2. Quick start and restart: 
No need feeding water before start, first start is the same way. 
Reduce the site work

3. Efficiency ≥80%, save running cost, your Energy-efficient in all pump life. 

4. Pass the solid particles up to 75 mm, sensible choice under various working condition. 
Due to pass the large diameter solid particles, so this SPH pumps are suitable for deep. 

5. Flange standard: GB, HG, DIN, ANSI standard, according to your requirements. 

6. A variety of material to choose
Cast iron/ stainless steel/ steel/ Ductile iron/ Duplex stainless steel
Shaft seal: Mechanical seal / packing seal

7. Save installation place, low noise, easy maintenance
Compact structure, SPH series High efficiency energy-save self priming motor pump. Pump casing and the suction device is compact; Save the installation place. The pump running with stable operation, and low noise. The pump assembly by the high concentricity components. Use the IEC standard motor directly connected. Don't remove the pump casing change the parts of pumps and very easy to make the maintenance. 

Oil Field Well point Dewatering Project

General Introduction
SPH series High efficiency energy-save self priming motor pums are joint designed by DRAKOS PUMP Singapore and REEOFLO of Germany company. It is big different from the traditional multiple faults: Self-priming pump unique dry running structure, can fast automatic startup and restart, start for the first time without feeding liquid. Self-priming height can be 9.5m; Excellent hydraulic design and unique structure and keep the strong self priming with higher efficiency than traditional self-priming pump over 20%. 
SPH series high efficiency self-priming pumping is usually drive by motor. This series of pump can transport all kinds of used for Pure, slightly polluted and gressive liquid with a viscosity of up to 150 mm²/s, solid particles less than 75 mm. 

Conductive Quick Connector with double seal ring radial seal structure, rubber modified by O - ring, mainly for fluid and the physical, chemical properties of custom, prevent aging, corrosion, swelling; O - ring have intermediate spacer ring separated, two sealing rings of the corresponding event space, the rubber matrix bonding does not occur, the external O-ring using synthetic rubber, enhanced mechanical properties, prevent air aging. Sealing ring and a spacer ring through the outer ring of the elastic bayonet device firmly fixed in the shell, does not produce seal off and shift phenomenon produced. Greatly ensure the safety of the seal.

Quick Connector composed of a connector housing, O - ring, O - ring, a spacer ring, outer ring, a self-locking buckle, when another pipe adapter (male connector) insert joint, because of the self-locking buckle has certain elasticity with buckle fastener can connect the two connectors together, then pulled back, ensure that the installation in place so fast joint can play a role. Disassembly and maintenance as long as the first to promote the positive joint and press and hold the self-locking buckle at both ends of the buckle buttons, the self-locking expansion in the middle, you can easily pull out the connector, re connect forward should use SAE 30, heavy oil lubrication.

The electric conduction fast joint is mainly in the medium of methanol gasoline and ethanol gasoline.. It has the overall structure, the best sealing effect. Can work under pressure 10bar. The engine area temperature is suitable for the short time of the -40 up to +110 to reach the +150 degree (about half an hour).

Conductive Quick Connector

Conductive Quick Connector,Conductive Connector,Automotive Fuel Line Quick Connector

Linhai Shinyfly Auto Parts Co.,Ltd. , https://www.chinashinyfly.com