Model NO.: MPDM-36
Heat Source: Heat Transfer Oil
Control Mode: P.I.D. Microprocessor
Temp. Working Range: +45ºC to 320ºC
Temp. Control Accuracy: Within +/- 1 ºC
Heating Method: Direct Heating (Indirect Cooling)
Application: Die Casting Industries
Expantion Tank Volume: 62L
Net Weight: 300kg
Trademark: MAIPT
Transport Package: Wooden Case as Usual
Specification: 1385*650*1400
Origin: China
HS Code: 8419899090
Heating Mold Used Temperature Control Equipment (MPDM-36) Special for Die Casting IndustryÂ
 BRIEF DESCRIPTION | WWW.MAIPT.LTD/ |
Mold Temperature Control Units(TCU) PID process controller are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control. MPDC/MPDM series Heat Transfer Oil type TCU are specially engineered for the temperature control in die casting industry.  According to the temperature difference of stationary mold and movable mold, it has two methods of temperature control for selection: one is single-circuit and the other is dual-circuits. Both of them can provide the temperature range from 45°C to 320 °C, customized heating capacity and voltages are available. |
 FEATURES / FUNCTIONS / SAFETY PROTECTIONS | WWW.MAIPT.LTD/ |
 BASIC FUNCTIONS | * OPTIONAL FUNCTIONS | |
- Thermometer for return oil | Â | * Control mode: PLC |
- Switchover of heating power | Â | * Explosion-proof device |
- Automatic air-exhausting after startup | Â | * Delay cooling after shutdown |
- Control mode: Microcomputer control | Â | * RS485 remote control function |
- BY-PASS pressure release loop for hot oil | Â | * Air-blowing and return oil function |
- Isolated electric cabinet for long service life | Â | * Negative-pressure system running |
- SUS integrated pipelines for less pipe resistance | Â | * Customizable multi-point Temperature unit |
- System pressure & Functional test before shipping | Â | * Customizable horse power and heating power for oil pump |
 SAFETY PROTECTIONS                                                   | ||
 Temperature anomaly                                   | → |  Alarm and cut off power, when cycle-oil's Temp. exceed upper limit. |
 Power reverse                                             | → |  Power supply phase detection to prevent pump reverse, alarm indication. |
 Pump overload | → |  Thermal overload relay protect pump from overloading, alarm indication. |
 Low oil protection | → |  Level-switch detects the oil level, prevent low oil and alarm indication. |
 Pressure anomaly | → |  Automatic stop heating operation when system pressure anomaly. |
 Anomaly heating | → |  Heating contactor working, and anomaly heating alarm indication. |
 Pipe blockage | → |  BY-PASS pressure release loop to protect pump. |
 Air exhaust Function | → |  Automatic air-exhausting after startup. |
 Short circuit | → |  Air-break switch - releasing. |
 DETAILS SHOW | WWW.MAIPT.LTD/ |
 TECHNICAL SPECIFICATION | WWW.MAIPT.LTD/ |
Specification Table for MPDC/MPDM Series
Model | Heating Capacity | Pump Data | Pipe Connecting | Approx. | Dimention | ||||
Power | Flow | Lift | Inlet | Outlet | Weight | L*W*H | |||
KW | BTU/Hr | KW | L/min | m | DN | DN | KG | mm | |
MPDC-18 | 9*2 | 61,434 | 0.5 | 35 | 60 | 15 | 15 | 170 | 1150*420*1000 |
MPDC-36 | 15*2 | 102,390 | 1.1 | 60 | 60 | 20 | 20 | 200 | 1250*420*1000 |
MPDC-48 | 20*2 | 136,520 | 2.8 | 100 | 80 | 25 | 25 | 225 | 1350*500*1150 |
MPDM-18 | 18+18 | 122,868 | 0.55*2 | 30 | 50 | 15*2 | 15*2 | 300 | 1250*550*1150 |
MPDM-36 | 30+30 | 204,780 | 1.1*2 | 60 | 60 | 20*2 | 20*2 | 340 | 1250*550*1150 |
MPDM-48 | 40+40 | 273,040 | 2.8*2 | 100 | 80 | 25*2 | 25*2 | 380 | 1335*600*1350 |
2. Above items are only a part of ours, customization for special specifications is also acceptable.Â
3. Three types of contactor output optional: Physical contactor, Solid State Contactor, SCR Contactor. Â Â Â Â Â Â Â Â Â Â Â
Â
Specification Details for MPDM-36
No. | Part Name | Specification | Technical Data |
1 | Â | Power Supply | 3N-380-50HZ |
2 | Â | Hot Medium | Oil |
3 | Â | Control Mode | PC board Self-optimized microprocessor |
4 |  | Temp. Control Accuracy | PID±1ºC |
5 |  | Temp. Control Range | Inlet-Oil Temp. ( +45ºC~320ºC ) |
6 | Â | Heating Power | 30KW +30KW( 15KW *2 +15KW *2 ) Adjustable |
7 | Â | Heat Exchange Area | 0.36M2+0.36M2 |
8 | Â | Heating Method | Direct heating ( Indirect cooling ) |
9 | Pump | Model | TOE/C4281 |
10 | Power Consumption | 1.1KW | |
11 | Delivery Lift | 30M | |
12 | Flow Rate | 30L/Min | |
13 | Pipeline Diameter | Hot Medium Inlet/Outlet | DN20*2 (Adjustable, no more than DN20)Â |
14 | Cooling Water Inlet/Outlet | DN15 | |
15 | Drain Oil Port | DN15 | |
16 | Temperature Controller | Model | P6100 (Accuracy PID±1ºC) |
17 | Modulating Action | Dual PID control of heating and cooling | |
18 | Temp. Interaction Stick | K- thermocouple | |
19 | Display State | Respectively display setpoint & real point | |
20 | Output Select | Relay output | |
21 | Heat Transfer Oil | Volume ( Inside Pipeline ) | Approx20L |
22 | Special Function | Oil Return | Return oil back suction of oil pump |
23 | Machine Frame Size | L x W x H | 1650*550*1250mm ( Exclude the casters ) |
24 | Expension Tank | Volume | 62L |
25Steel Plate High Strength Steel Plate,Structural Steel Sheet,Carbon Steel Plate,Carbon Steel Sheet LIAOCHENG CHANGYI METAL MATERIAL CO., LTD. , https://www.cnsteelsheet.com |