Hand Operated Pump for Oil

Model NO.: JYS-01-01
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Origin: China
HS Code: 84312000
Model NO.: JYS-01-01
Warranty: 1year
Trademark: no brand
Transport Package: Carton Box
Origin: China
HS Code: 84312000
JYS-01-01
Tube Size Inlet32mm      oulet 25mm Suction 1m
Tube surface treatment Power coating Rotation 70r/min
Galvanization Flow 28kg/min  
Chrome plating Qty 10pcs
Pump body diameter 135mm Inner box 36*18*153 cm
Lift 7m Carton box 80*38*37.5cm
    G.W./N W.: 21/20kg

Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
   7.Can not be extracted water and acid and alkali chemical solution!

Hand Operated Pump for Oil
Hand Operated Pump for Oil
Hand Operated Pump for Oil
Hand Operated Pump for Oil
 
JYS-01-01
Tube Size Inlet32mm      oulet 25mm Suction 1m
Tube surface treatment Power coating Rotation 70r/min
Galvanization Flow 28kg/min  
Chrome plating Qty 10pcs
Pump body diameter 135mm Inner box 36*18*153 cm
Lift 7m Carton box 80*38*37.5cm
    G.W./N W.: 21/20kg

Operation:
1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
Use attention:
1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
   7.Can not be extracted water and acid and alkali chemical solution!

Hand Operated Pump for Oil
Hand Operated Pump for Oil
Hand Operated Pump for Oil
Hand Operated Pump for Oil
 

Shrink Film

Shrink Film,Shrink Wrap,Pvc Shrink Film,Heat Shrink Film

Hebei Yintop Technology Co.ltd , https://www.yintopplasticfilm.com