Guangqi Honda sales headquarters minister and sales minister He Xianqing said that in 2011, Guangzhou Automobile Honda achieved a total sales of 362,000 units, and the Accord had obtained the first place in the high-class sedan market with 160,735 vehicles.
When talking about the market situation in 2012, He Xianqing stated: “There are still many uncertain factors in 2012, and we think we will still maintain a 10% growth rate.†In 2012, Guangzhou Automobile Honda will enter a new development year and will Introduce two hybrid cars, one is a coupe and the Fit series. In the area of ​​electric vehicles, the demonstration experiment of the Fit electric vehicle was jointly organized by Honda and the Guangzhou Municipal Government in November last year. It is expected that electric vehicles will be produced on the production line of Guangzhou Automobile Honda by the end of 2012. He Xianqing revealed that Fit Pure Electric Vehicles will be produced in small batches, and the area to be sold in the future is basically in areas where the use of electric vehicles is relatively mature, such as Guangzhou, Shenzhen, and Hangzhou. "In the future sales, we may also have some innovations. In addition to direct sales, it is possible to carry out rental sales of electric vehicles."
Pneumatic ball valve is a ball valve equipped with a pneumatic actuator. The execution speed of the pneumatic actuator is relatively fast. The fastest switching speed is 0.05 seconds / time, so it is usually also called pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such as solenoid valve, air source treatment triplet, limit switch, positioner, control box, etc., to realize local control and remote centralized control. The valve can be controlled in the control room without running to the site or high altitude and dangerous areas for manual control, which saves human resources, time and safety to a great extent.
The pneumatic ball valve can be closed tightly only by using the pneumatic actuator to rotate 90 degrees with the air source and a small rotating torque. The completely equal inner cavity of the valve body provides a very small resistance and straight flow channel for the medium. It is generally considered that the ball valve is most suitable for direct opening and closing. The main feature of the ball valve is its compact structure and easy operation and maintenance. It is suitable for general working media such as water, solvent, acid and natural gas, as well as media with poor working conditions, such as oxygen, hydrogen peroxide, methane and ethylene. The ball valve body can be integral or combined.
Pneumatic butterfly valve is composed of pneumatic actuator and butterfly valve. Pneumatic butterfly valve is a pneumatic valve that uses the circular butterfly plate rotating with the valve stem as the opening and closing property to realize the opening and closing action. It is mainly used as a block valve. It can also be designed to have the function of regulation or section valve and regulation. Butterfly valve is more and more used in low-pressure large and medium-sized pipelines. Classification of pneumatic butterfly valve: stainless steel pneumatic butterfly valve, hard seal pneumatic butterfly valve, soft seal pneumatic butterfly valve and carbon steel pneumatic butterfly valve. The main advantages of pneumatic butterfly valve are simple structure, small volume, light weight and low cost. The characteristics of pneumatic butterfly valve are particularly remarkable. It is installed in a high-altitude concealed channel, controlled by two position five way solenoid valve, easy to operate and can also adjust the flow medium.
Pneumatic valve,Pneumatic ball valve,Pneumatic butterfly valve,Pneumatic 3 way ball valve,Pneumatic 4 way ball valve
Glove Industry Co.,Ltd. , https://www.glovemech.com