1. Characteristics:
Â
1) Monitoring 7 frequency at the same time
2) Suitable for depths of 300mÂ
3) Easy of handling, esay to learn
4) Auto-monitoring, auto-storing data, auto-drawing curves
5) USB ports.
Â
Â
Main technical parameters of HFD-C groundwater detector:
Â
Measuring range | 0-255mv |
Detection depth | <300m |
Measuring channel | 7 channels |
Measuring frequency | 4900,2000,600,170,67,35,25HZ |
Frequency tolerance | 2% |
Resolution | 0.001mVÂ |
Repetitive error | ±2% ±2 Bit |
A/D switch | 16 Bits 1Msps |
Input impedance | ≥10MΩ |
Power frequency suppression | >80dB |
Data storage | 48W |
Display | 5" touch screen |
Interface | USB2.0 |
Power source | DC7.4V 5200mAh lithium battery |
Power Consumption | 400mA |
Temperature | -20ºC~+60ºC |
Humidity | 80% |
Dimension | 27×22×15CM |
Weight | 2.3KG |
Â
2. Brief Introduction:
Â
HFD-C Multi-Function Natural Electrical Field detector is a water detector which is specifically designed for depths of 300m.
It monitors the changes of underground electrical resistivity by measuring the intensity of natural electrical field, then analysing the position and depths of underground water.
This instrument solved a major issue, which is freqency choosing and anti-jamming in a natural electrical field.
It uses waterproof shell and touch screen, which is easy of handling and easy to learn.
HFD-C Multi-Function Natural Electrical Field detector is portable, efficiency, easy-handling and accurate analysis. It is auto-measuring which could show data and curves clearly and simple.
Comparing with traditional DC electrical water detector, its speed of measuring was increased more than 8 times, but the instrument weight was decreased 8 times.Â
In the past 20 years experience, we won a high reputation and were high acclaimed by our customers.
3.Compare with traditional geo-electrical water detectors:
Traditional geo-electric water detectors | HFD-CÂ Ground Water Detector |
Heavy meter and complicated wiring due to manual power supply. | No need power supply, use natural electric field and 20 meters receiver pole, through special amplify method to complete survey. |
Need 3-5 persons or more to operate it and cause heavy work and low efficiency. | 2 people are enough to finish the work High efficiency |
Heavy, about 50-500KG, hard to remove. | Light weight, <5KG, easy to carry. |
Need to convey data to PC and use various software to draft and analyze. | We configure a 4G U-disk storage to introduce the data! Then you can do various operations for the measured data. |
Professional operations and expensive | Very practical and low cost |
Just know water location and depth | Can know water location, water supply direction, water depth and water outflow. |
4. Application:
Metal and non-metal ore survey;
Decrease mineral invest venture and increase exploration success rate;
Underground water detect in all kinds of the geological conditions;
Meet demand of drinking water, industrial usage and agricultural irrigation;
Engineering geological prospect and disaster geological detect;
Coal goaf, archaeological mining, city exploration and non-metal pipe survey.
Â
5. Main features:
Fast and high efficiency.
Easy to carry.
Easy operation.
Good precision and high accuracy.
Very practical and low cost.
Flexible array-traditional and unique array method.
6. Advantage:Â Â
Â
1. It is integrated into an aluminum alloy tool case, then can be carried freely.
2. Built-in charging lithium batteries, can fast charge for 4 hours, then you can use it for 16 hours.
3. Special rough measurement and fine measurement electrodes largely improve the speed and precision of equipment.
4. Multiple anti-jamming design and unique anti-jamming modes to choose largely increase the accuracy and stability of data.
Â
Â
 Good price detect 300m depth underground deep water detector
1. Characteristics:
Â
1) Monitoring 7 frequency at the same time
2) Suitable for depths of 300mÂ
3) Easy of handling, esay to learn
4) Auto-monitoring, auto-storing data, auto-drawing curves
5) USB ports.
Â
Â
Main technical parameters of HFD-C groundwater detector:
Â
Measuring range | 0-255mv |
Detection depth | <300m |
Measuring channel | 7 channels |
Measuring frequency | 4900,2000,600,170,67,35,25HZ |
Frequency tolerance | 2% |
Resolution | 0.001mVÂ |
Repetitive error | ±2% ±2 Bit |
A/D switch | 16 Bits 1Msps |
Input impedance | ≥10MΩ |
Power frequency suppression | >80dB |
Data storage | 48W |
Display | 5" touch screen |
Interface | USB2.0 |
Power source | DC7.4V 5200mAh lithium battery |
Power Consumption | 400mA |
Temperature | -20ºC~+60ºC |
Humidity | 80% |
Dimension | 27×22×15CM |
Weight | 2.3KG |
Â
2. Brief Introduction:
Â
HFD-C Multi-Function Natural Electrical Field detector is a water detector which is specifically designed for depths of 300m.
It monitors the changes of underground electrical resistivity by measuring the intensity of natural electrical field, then analysing the position and depths of underground water.
This instrument solved a major issue, which is freqency choosing and anti-jamming in a natural electrical field.
It uses waterproof shell and touch screen, which is easy of handling and easy to learn.
HFD-C Multi-Function Natural Electrical Field detector is portable, efficiency, easy-handling and accurate analysis. It is auto-measuring which could show data and curves clearly and simple.
Comparing with traditional DC electrical water detector, its speed of measuring was increased more than 8 times, but the instrument weight was decreased 8 times.Â
In the past 20 years experience, we won a high reputation and were high acclaimed by our customers.
3.Compare with traditional geo-electrical water detectors:
Traditional geo-electric water detectors | HFD-CÂ Ground Water Detector |
Heavy meter and complicated wiring due to manual power supply. | No need power supply, use natural electric field and 20 meters receiver pole, through special amplify method to complete survey. |
Need 3-5 persons or more to operate it and cause heavy work and low efficiency. | 2 people are enough to finish the work High efficiency |
Heavy, about 50-500KG, hard to remove. | Light weight, <5KG, easy to carry. |
Need to convey data to PC and use various software to draft and analyze. | We configure a 4G U-disk storage to introduce the data! Then you can do various operations for the measured data. |
Professional operations and expensive | Very practical and low cost |
Just know water location and depth | Can know water location, water supply direction, water depth and water outflow. |
4. Application:
Metal and non-metal ore survey;
Decrease mineral invest venture and increase exploration success rate;
Underground water detect in all kinds of the geological conditions;
Meet demand of drinking water, industrial usage and agricultural irrigation;
Engineering geological prospect and disaster geological detect;
Coal goaf, archaeological mining, city exploration and non-metal pipe survey.
Â
5. Main features:
Fast and high efficiency.
Easy to carry.
Easy operation.
Good precision and high accuracy.
Very practical and low cost.
Flexible array-traditional and unique array method.
6. Advantage:Â Â
Â
1. It is integrated into an aluminum alloy tool case, then can be carried freely.
2. Built-in charging lithium batteries, can fast charge for 4 hours, then you can use it for 16 hours.
3. Special rough measurement and fine measurement electrodes largely improve the speed and precision of equipment.
4. Multiple anti-jamming design and unique anti-jamming modes to choose largely increase the accuracy and stability of data.
Â
Â
Â
Mobile Concrete Batching Plant
This product(concrete batching plant) is equipped with the storage, batching, conveying, stirring, control and other devices of various raw materials required for precast concrete, and various aggregates, powders, admixtures, water, etc. A complete set of equipment for supplying concrete in a concentrated manner than by a mixer.
Features of concrete batching plant
1.The overall steel structure of the mixing station is made of high-quality steel, which has high overall structural strength and strong stability.
2.The mixing machine adopts the twin-shaft forced mixing main machine, which has strong mixing performance, uniform mixing and high productivity.
3.Excellent pneumatic components, electrical components, etc.; to ensure the reliability of the equipment, accurate metering performance.
4.Each maintenance and repair site is provided with a walking platform or a check ladder, and has sufficient operation space. Easy maintenance and repair
Mobile Concrete Batching Plant,Yhzs25 Mobile Concrete Mixing Plant,Yhzs50 Mobile Concrete Mixing Plant,Yhzs75 Mobile Concrete Mixing Plant
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdstabilizedsoilmixingplant.com