Model NO.: GZ
Trademark: BRICTEC
Transport Package: Containers
Specification: ISO9001: 2000
Origin: China
HS Code: 7484
How to choose your dryer?There are 3types of dryer: 1)Small dryer 2)chamber dryer 3)Tunnel dryer
**Specifications**
1. Speed up for green brick drying
2. Waste heat from kiln
3. No influence by the bad weather
4. Saving your area and labor
Semi automatic clay brick machine for clay brick making factory applies to clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. To produce provisions cross-section of ordinary solid bricks, hollow bricks, and other products.
**Why use the dryer? **
(1)High efficiency: Speed up for green brick drying than the natural air drying;
(2)Energy saving: Waste heat from kiln, it can recover the waste heat from kiln;
(3)No influence because of the bad weather, even in a cold, wet or rainning day, contunous operation for green brick;
(4)Saving your area and labor: Dryer takes small area and a little labors;
(5)Drying chamber is used together with kiln, It can speed up drying.
Dryer type | Brick setting times | Material option | Product standard | Auto-Level | Cost | |
Small dryer | Twice setting | Clay ( Esp. for Indian and Bengal ) | Solid brick& cell brick( hole rate≤25%) | Semi-Auto /Auto |
Lower | |
Chamber dryer | Twice setting | Clay ( Esp. for Indian and Bengal ) | Solid brick& cell brick( hole rate≤35%) | Semi-Auto /Auto |
Higher | |
Tunnel dryer | Once setting | Shale,etc. Hard material | Solid brick & cell brick( hole rate ≤25%) | Semi-Auto /Auto |
Highe |
Brick Making and Forming Production line Flow Chart
Raw material preparation----Brick forming & cutting---Dryer&firing ---Brick transport and Packing
Company Introduction&Our Service
Xi'an Brictec Engineering Co. Ltd not only majors in sale of brick making machines, but also concentrates on the overseas domestic fired brick designing, kiln designing, factory building designing and turn-key project. We provide solutions to brick and tile making industry by a group of professionals who have more than 25 years experiences in this industry.
Business Scope
I. Design and construction of a turn-key project for modern plant;
II. Design and installation of highly energy efficient and productive tunnel dryer and tunnel kiln system;
III. Retrofit and modernization.
If you have any question to ask, Please be free to contact us!
CNC Machining Parts Co., Ltd. , http://www.nscncmachining.com