The real ethylene industry in China began with the introduction of the first 300,000-ton/year ethylene plant in Yanshan Petrochemical Company in 1976. Its equipment was imported from complete sets to introduce only key equipment. It took 20 years, but it really achieved 300,000 tons/year of ethylene. Localization of key equipment is only a matter of nearly 10 years. At present, the scale of ethylene production generally reaches 800,000 to 1 million tons per year, and the domestic production of ethylene equipment is quite difficult. Many of the equipment that has been domestically produced in the past have to be re-imported. At present, China's petrochemical major equipment manufacturing industry compared with the international industry, the main gap is the weak performance of independent innovation, and the one million tons of large-scale ethylene complete sets of equipment technology, represents the highest level of world petrochemical equipment, its localization will greatly improve China The innovation capability of petrochemical equipment manufacturing industry has narrowed the gap between China's petrochemical equipment manufacturing industry and the world's advanced level. Therefore, it is imperative to realize the localization of large-scale ethylene equipment of one million tons.
To this end, Wang Tingjun, director of the original major equipment localization office of the China Petroleum & Chemical Corporation and a professor-level senior engineer of the China Petroleum and Chemical Corporation, conducted an in-depth analysis of the feasibility of localizing large-scale ethylene and PTA plants of one million tons.
Market demand
In 2005, China's ethylene production capacity was 9 million tons/year. It is predicted that in 2010 China's ethylene demand will reach 25 million to 26 million tons, and its production capacity will reach 14 million tons, which can only meet 55% of domestic demand. In 2020, China's ethylene demand will reach 37 million to 41 million tons, and the production capacity will reach 23 million tons, which can only meet 60% of domestic demand. It is tentatively predicted that by 2010 China will need to add about 8 sets of 800,000 to 1 million tons of ethylene complete sets of equipment, and by 2020 will need to add another 9 sets.
It is understood that China has approved the construction of large-scale ethylene projects are: Zhejiang Zhenhai Petrochemical 1 million tons / year ethylene project, a total investment of 23.3 billion yuan, completed in 2009; Quanzhou, Fujian 800,000 / year ethylene project, a total investment of 26.6 billion Yuan, completed in 2008; Tianjin Petrochemical 1 million tons/year ethylene project, with a total investment of RMB 20.1 billion, completed in 2008; Chengdu Chengdu 800,000 tons/year ethylene project, total investment RMB 21 billion, completed in 2010; 600,000 tons in Lanzhou The annual ethylene transformation project, with a total investment of 6.3 billion yuan, was completed in 2006; the Xinjiang Dushanzi Petrochemical 1 million tons/year ethylene project, with a total investment of 26.2 billion yuan, was completed in 2008. The ethylene projects that are being prepared in advance include Guangzhou Petrochemical's 800,000-ton ethylene project, Fushun Petrochemical's 800,000-ton ethylene project, Wuhan Petrochemical's 800,000-ton ethylene project, and Dalian's 800,000-ton ethylene project.
Build a set of one million-ton large-scale ethylene complete sets of equipment. The total investment is generally over 20 billion yuan. According to experience, equipment costs account for about 30% of the total investment, and the equipment cost for each large-scale ethylene project will reach about 7 billion yuan. Therefore, there will be equipment market demand of about 56 billion yuan during the “11th Five-Year Plan†period, and 63 billion RMB will have equipment market demand during the “12th Five-Year Plan†period.
Basic profile
The one million-ton large-scale ethylene plant has basically three main production facilities, including 800,000 to 1 million tons of ethylene cracker, 400,000 to 600,000 tons of polyethylene per year, and 400,000 to 600,000 tons per year. Polypropylene plant, and auxiliary facilities such as air separation plant, thermal power station, air compression station, water circulation system, sewage treatment system, etc. The process equipment in these devices is divided into petrochemical special equipment, petrochemical general equipment and instrumentation. Among them, petrochemical special equipment includes industrial furnaces, reaction equipment, heat exchange equipment, towers, storage and transportation equipment, and special machinery such as filtration, separation, drying, granulation, and packaging machinery; general petrochemical equipment includes gas compressor sets, pumps, valves, etc. Instrumentation mainly includes control instruments, measuring instruments, on-line analysis instruments and so on.
800,000 to 1 million ton/year ethylene cracker main equipment totals about 380, mainly including 25 reactors, 4 towers, 162 heat exchangers, 52 waste heat boilers, 97 containers, and 6 compressors. 124 centrifugal pumps and 1 set of DCS automatic control system. Major key equipment includes: 9 ethylene cracking furnaces with a capacity of 150,000 tons/year; 1 cracking gas compressor, import flow of 261030 Nm3/h, outlet pressure of 3.89 MPa, shaft power of 45772 kW, and 1 propylene compressor, imported The flow rate was 164,822 Nm3/h, the outlet pressure was 1.71 MPa, the shaft power was 31,704 kW, and 1 set of ethylene compressor was used. The inlet flow rate reached 19,350 Nm3/h, the outlet pressure was 2.83 MPa, and the shaft power was 7,423 kW. There are also a number of large-scale towers such as propylene distillation towers, ethylene distillation towers, gasoline dephlegmators, quench oil towers, quench water towers, and more than 20 ethylene cold boxes.
400,000 to 600,000 tons/year of polyethylene equipment totals about 490 sets, including mainly polymerization reactors, 16 towers, 62 heat exchangers, 61 containers, 35 compressors, fans, and 48 pumps. One set of DCS automatic control system. Major equipment such as gas-phase reactors, rotary dryers, circulating gas compressors, ethylene circulation compressors, centrifuges, extrusion granulators, and packaging palletizing units. 400,000 to 600,000 tons/year of polypropylene equipment totals about 220 sets, including 280 sets of petrochemical special equipment, 120 sets of general equipment, and 1 set of DCS automatic control system. Major equipment such as tank reactors or tubular reactors, centrifugal cycle gas compressors, reciprocating labyrinth piston exhaust compressors, extrusion granulators, and packaging palletizing units.
Development Trends At present, the general trend of the development of large-scale ethylene equipment in the world is that the petrochemical process technology has been continuously improved, and the scale of production equipment is getting larger and larger, thereby promoting the development of petrochemical equipment. The single-line production capacity of ethylene crackers in the world has reached 1.27 million tons/year, and the single-line production capacity of polyethylene and polypropylene units has reached 500,000 tons/year. The large-scale petrochemical plant has promoted the development of technologies such as the design, manufacture, heat treatment, quality inspection, transportation, and on-site assembly of petrochemical equipment as well as the research and development of high-performance new materials; the development of petrochemical equipment and the research and development of process technology and design have become increasingly closer. The formation of proprietary and patented technologies has become a common practice and trend for foreign patent companies; mechatronics is a major trend in the development of petrochemical equipment industry. Future petrochemical equipment will be high performance, high raw material utilization, low energy consumption, and low The intelligent system of pollution, environmental comfort and recyclability; the development of energy-saving and environment-friendly petrochemical equipment to reduce energy consumption and protect the environment has become the development trend of the world's petrochemical equipment manufacturing industry; as most petrochemical equipment is at a high temperature, Operating under high pressure and corrosive conditions, the application of new materials can significantly improve the mechanical properties of the material, reduce equipment quality, reduce costs, and facilitate transportation.
Ultra Fine Powder Milling Machine
The Ultra Fine Powder Milling Machine is used to grind granules or small size material to super fineness powder, such as salt, sugar, grains, herbs and so on. The smallest size of output powder can reach 300 mesh. The powder size can be adjusted. The machine can continue work, the largest production ability can be 1000kg/h.This machine have dust collect system, so the air in workshop will clean. The material can be stainless steel 304 and stainless steel 316L. This machine is popularly used in foodstuff, chemical and pharmacy industry.
Features/Equipment characteristics:
1). Appearance design is reasonable and safe. The structure of this machine is simply, so it's convenient to clean and maintenance.
2). The blade is sharp, sturdy, strong and durable, and the material is harmless to people.
3). The plate of the whole machine is heavier than ordinary machines and has a longer service life.
4). The output particle size can be changed according to customer`s request.
5 ).The machine can match dust collect system, so the air in workshop will clean.
Ultra Fine Powder Milling Machine,Ultra Fine Rice Flour Machine,Ultra Fine Rice Flour Making Machine,Ultra Fine Powder Mill Grinder
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com