“Is this car moving?†When your grandfather in your pocket finally sees a used car in the second-hand car trading market, even if he sincerely asks the car dealer, the answer is definitely the same as the “private car.†Did not move, absolutely never moved." So, in addition to buying a used car with a connoisseur, how can we get rid of the second-hand car?
  Take a look at the dry goods before, what problems the car can not touch? 　
Accident car : The accident car mentioned here refers to the damage of the car's core components (engines, structural parts, chassis, etc.) that affect the vehicle's state rating. Those small, scratchy cars that do not hurt or hurt are not considered in the accident car. Inside!
Soaking water vehicles : vehicles that have been soaked in water can be classified into three categories according to the severity of the damage. If the water depth exceeds the wheels and the vehicle is less harmful, if the water depth exceeds the center console or the vehicle that is not directly under the roof, it will be repaired. After the time bomb!
The goal is to lock in the used car. What should be the first step?
  Whether it is an accident car or a bubble truck, the most direct way to check the condition is to look up the insurance claim record. Because both the car after the flood and the vehicle after the collision require major repairs, the owner often chooses insurance claims, so checking the record of the car insurance claim is the first step to buying a used car. However, the first car network (micro-signal: dycwesc) small i reminds the owner that there are many car owners who are not involved in wading insurance, and cannot rely on an insurance claim record to determine the used car condition.
Which clues expose the used car "real life"?
ã€Bubble car article】
  Check the bottom of the car blanket : Once the bottom of the influent vehicle is bound to be the hardest hit area, the soundproof and heat-insulating cotton felt at the bottom of the car, although it looks dry and clean after treatment, the small sand stone left on the cotton felt is very difficult to completely Clearing up, these mudslides are evidence of car soaking.
Smell the interior musty smell : The sponge in the water seat and the bottom cotton felt will inevitably have residual sewage. Even if it is dried and dried, it is difficult to completely remove the musty, especially the interior seat seams and seat belts. , often leaving traces of water after the bubble.
To see if the lamps are yellow : Check whether there are signs of water stains or yellowing in the headlights inside the headlights. Check whether the front and rear lights of the headlights are old or new. Of course, fog lamps that are easily overlooked cannot be ignored.
Whether the seat track has rust or not : In addition to checking the chassis, trunk, seams, but also check the seat back and forth sliding rails of iron, once the water is immersed in the car first soak it is, and repair is often overlooked, can be Pull the seat to the rear to see if there is a large rust.
Accident car article
  Look at the paint surface and waist line : Checking the condition of any used car, the first thing to look at is whether the body paint is uniform, whether the surface is smooth and smooth, whether the waist lines on both sides are straight, and whether the gap widths on both sides of the hood are symmetrical.
See the width of the side seam width : the width of the gap between the body should be uniform, the gap between the door and the gap is appropriate 4mm or so, the seal is not damaged and loose, focus on inspection A column, B column, C column side seam condition, the trunk Edge seam inspection must not be omitted.
Whether the engine compartment has original solder joints : Open the engine cover, check the anti-collision steel beams in the energy-absorbing area and the original factory solder joints. The edge of the engine cover should be naturally straight and smooth, and the original solder joints must be touched. Slightly round and slightly concave, otherwise re-burn welding marks.
If you think that in the traditional mixed-use vehicle market, even if it is hard to escape a trap, then simply choose a larger used car dealership, or a third-party trading platform, such as 99 good car , which is used by The second-hand car e-commerce platform created in 2014 by the first car network accumulated by the car industry promises that the vehicles sold are not fire cars, flooding vehicles, commercial vehicles, and non-event and major accident vehicles. I have a problem car!
  Take a look at the dry goods before, what problems the car can not touch? 　
Soaking water vehicles : vehicles that have been soaked in water can be classified into three categories according to the severity of the damage. If the water depth exceeds the wheels and the vehicle is less harmful, if the water depth exceeds the center console or the vehicle that is not directly under the roof, it will be repaired. After the time bomb!
The goal is to lock in the used car. What should be the first step?
Which clues expose the used car "real life"?
ã€Bubble car article】
Smell the interior musty smell : The sponge in the water seat and the bottom cotton felt will inevitably have residual sewage. Even if it is dried and dried, it is difficult to completely remove the musty, especially the interior seat seams and seat belts. , often leaving traces of water after the bubble.
To see if the lamps are yellow : Check whether there are signs of water stains or yellowing in the headlights inside the headlights. Check whether the front and rear lights of the headlights are old or new. Of course, fog lamps that are easily overlooked cannot be ignored.
Whether the seat track has rust or not : In addition to checking the chassis, trunk, seams, but also check the seat back and forth sliding rails of iron, once the water is immersed in the car first soak it is, and repair is often overlooked, can be Pull the seat to the rear to see if there is a large rust.
Accident car article
See the width of the side seam width : the width of the gap between the body should be uniform, the gap between the door and the gap is appropriate 4mm or so, the seal is not damaged and loose, focus on inspection A column, B column, C column side seam condition, the trunk Edge seam inspection must not be omitted.
Whether the engine compartment has original solder joints : Open the engine cover, check the anti-collision steel beams in the energy-absorbing area and the original factory solder joints. The edge of the engine cover should be naturally straight and smooth, and the original solder joints must be touched. Slightly round and slightly concave, otherwise re-burn welding marks.
If you think that in the traditional mixed-use vehicle market, even if it is hard to escape a trap, then simply choose a larger used car dealership, or a third-party trading platform, such as 99 good car , which is used by The second-hand car e-commerce platform created in 2014 by the first car network accumulated by the car industry promises that the vehicles sold are not fire cars, flooding vehicles, commercial vehicles, and non-event and major accident vehicles. I have a problem car!
Pp Syringe Filter,Pp Membrane Syringe Filter,0.45Um Syringe Filter,Polypropylene Syringe Filters
Ji'an city Qing Feng Filter Equipment Material CO.,Ltd , http://www.qingfengfilter2.com