Working principle diagram
The motor (4) drives the diaphragm (2) on the left and right plunger through the gearbox (3) one after another to reciprocate. In both the left and right pump chambers, there are four one-way ball valves (1) up and down, movement of the diaphragm, resulting in a change in volume in the working chamber, forcing the four one-way ball valves to open and close alternately, Inhaled and discharged.
Diamond wire cutting (DWC) is the process of using abrasive wire impregnated with diamond dust of various diameters to
cut through materials. Because of the hardness of diamonds, it can cut through almost any material that is softer than the
diamond abrasive. Meanwhile it produces less kerf and wasted materials compared to solid blades . It is widely used for high
precision cutting of graphite, silicon, quartz crystal, ceramic, jade, foam, marble, stone, glass, plastic, etc.
Diamond Wire Saw Cutting Machine,Diamond Wire Cutting Machine,Diamond Wire Sawing machine,Abrasive Wire Sawing Machine,CNC Abrasive Line cut-off Machine
Jiangsu Sailing Intelligent Equipment Co., Ltd. , https://www.sailingcnc.com