From December 11 to 12, 2013, the first three councils and the second annual meeting of China Semiconductor Lighting/LED Industry and Application Alliance (hereinafter referred to as the Alliance) were held in Xiamen. Leaders of the Ministry of Industry and Information Technology, Fujian Provincial Economic and Information Technology Commission, Xiamen Economic Development Bureau and other industry leaders, industry experts, representatives of 140 enterprises and industry associations attended the annual meeting. Participants exchanged and discussed the development characteristics of the domestic semiconductor lighting/LED industry in 2013, the current challenges and the next development direction.
The overall trend of industrial development has become a bright spot in 2013. The rapid growth of domestic semiconductor lighting market demand is the main factor for the overall improvement of industrial development, and export growth is more obvious.
The main features of China's semiconductor lighting/LED industry in 2013 are: the rapid growth of semiconductor lighting market demand has driven the activeness of the industry chain; the changes in market demand have accelerated the pace of technological innovation, and the joint innovation of the industry chain has become a consensus; LED chip capacity utilization The rate has gradually increased and the price has further declined; the alliance, mergers and acquisitions and restructuring among enterprises have become increasingly active; lighting companies have paid more attention to the construction of sales channels, preparing for the large-scale start-up of the semiconductor lighting market. Since the second quarter of this year, the domestic semiconductor lighting market demand exceeded expectations and continued to grow rapidly, driving the simultaneous growth of LED devices, related materials and equipment markets. Some enterprises even experienced queue queuing that was rare in previous years. The rapid growth of domestic semiconductor lighting market demand is a major factor in the overall improvement of industrial development, and export growth is more obvious. While the industry is developing well, the phenomenon that enterprises increase production without increasing revenues and increasing incomes does not increase profits. In the fierce market competition, price war is the main means of competition; product quality has become the most concerned issue for current users.
The relevant state ministries and commissions to support the industrial development policy to improve the ability, support, brand, and promote the application of the Ministry of Industry and Information Technology for the semiconductor lighting / LED industry's main line of work.
The government's efforts to improve the semiconductor lighting / LED industry policy environment and promote industrial technology progress are continuing to increase. In January this year, the National Development and Reform Commission, the Ministry of Industry and Information Technology, the Ministry of Finance, the Ministry of Housing and Urban-Rural Development, and the State Administration of Quality Supervision, Inspection and Quarantine jointly issued the "Semiconductor Lighting Energy Conservation Industry Plan." In August, the State Council issued the "Opinions on Accelerating the Development of Energy Conservation and Environmental Protection Industries" and incorporated the LED industry into the entire environmental protection industry.
In October 2012, the Ministry of Industry and Information Technology held a special study of the Ministerial Office to support the semiconductor lighting/LED industry, and put forward specific requirements and formulated an outline of the action plan. On the basis of summarizing the experience of industrial development, the meeting called for key points, accumulating resources, and expanding applications; giving play to the role of the market in resource allocation, intensifying efforts to promote standards development and improving testing capabilities, and increasing funding support; .
Strong capabilities, heavy support, tree branding, and application are the main lines of work for the semiconductor lighting/LED industry by the Ministry of Industry and Information Technology. Hu Yan, inspector of the Electronic Information Department of the Ministry of Industry and Information Technology, said that starting this year, the Electronic Information Industry Development Fund will continue to increase its support for semiconductor lighting/LED technology innovation and industrialization for three consecutive years.
According to the "China's gradual reduction of the mercury-containing roadmap for fluorescent lamps" issued by the Ministry of Industry and Information Technology at the end of last year, the mercury content of fluorescent lamps will be gradually reduced in three stages starting from June 1 this year, and the comprehensive phase-out liquid will be decommissioned on December 31, 2014. Mercury production process. This is a great opportunity for the semiconductor lighting/LED industry. Hu Yan said.
Actively promote the semiconductor lighting / LED integrated standardization work of the Ministry of Industry and Information Technology. The release and implementation of the technical system effectively guided the revision and revision of standards in the field of semiconductor lighting technology, standardized market behavior and promoted industrial progress.
Wang Minyan, director of the Consumer Products Industry Division of the Ministry of Industry and Information Technology, said that the Ministry of Industry and Information Technology, as the competent department of the semiconductor lighting/LED industry, has always attached importance to strengthening the development of semiconductor lighting standards. The Ministry of Industry and Information Technology has released a comprehensive standardization technology system for semiconductor lighting, and has deployed standard projects in the field of semiconductor lighting in accordance with the order in which it has been released, formulated, and researched. The release and implementation of this technology system has important practical significance for effectively guiding the revision and revision of standards in the field of semiconductor lighting technology, regulating market behavior, and promoting industrial progress. At the same time, there have been significant progress in the development of industry standards, national standards, cross-strait common standards and international standards. In view of the fact that the standards and testing capabilities of China's semiconductor lighting/LED industry lag behind the development of the industry, efforts are made to promote the improvement of product testing capabilities.
Wang Minyan said that on the basis of the preliminary work, the next step will continue to implement the comprehensive standardization technology system for semiconductor lighting issued by the Ministry of Industry and Information Technology, and further supplement and improve it; together with the National Standards Committee, actively promote the introduction of a comprehensive standardization technology system for semiconductor lighting, and actively promote Standard project establishment and formulation work; continue to strengthen the formulation of international standards, strengthen exchanges and cooperation, actively introduce internationally advanced semiconductor lighting standards systems and standards, and enhance China's industrial development level.
Facing the new situation of industrial development, welcoming a new round of challenges Compared with foreign advanced enterprises, the core technologies and independent development capabilities of domestic enterprises are still weak, with high-end products and intellectual property risks.
Regarding the current status of industrial development, Hu Yan said that while the industry is developing rapidly, long-term deep-seated contradictions and short-term difficulties still exist, and key technologies have not yet achieved fundamental breakthroughs. Although some domestic leading enterprises have made substantial progress, compared with foreign advanced enterprises, the core technologies and independent development capabilities of domestic enterprises are still weak, with high-end products and intellectual property risks. The scale of enterprises is small and the product structure is unreasonable. Blind investment in some areas has increased the imbalance in the allocation of industrial resources. These are issues that deserve to be considered by the entire industry, especially the industry management. Hu Yan emphasized that in the process of enterprise transformation, I hope that the alliance can organize the following four aspects of work: one is to focus on enterprises and increase the intensity of joint industrial technology innovation; the second is to strengthen cooperation among industry chain enterprises; The third is to guide enterprises to pay more attention to the cultivation of brands; the fourth is to pay more attention to comprehensive standardization work and increase investment in related work.
The annual meeting invited the honorary chairman of the Shanghai Lighting Society, Zhang Haijun, and the consultant of Xiamen Photonics Industry Association, and the expert of semiconductor lighting standardization expert of the Ministry of Industry and Information Technology Peng Wanhua made a report on the development trend of lighting technology and LED device technology, Zhejiang Sunshine Lighting General Manager Guan Yong made a report on the development of LED lighting.
Others Series Products
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto Parts, Aluminium Die Casting for Communications, Lamp Part Series , Water Pump Part Series, Power Tool Series , radiator part series, anti-static flooring products and Other Series Products.
3.Die casting consulting for Aluminum Die Casting part design and die casting tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
 |
Other Series Products
Aluminium Die Casting Accessories,Mould Part Series Products,Die Casting Lamp Part,Alloy Die Casting Series Products
Ningbo Bowei Mould Metal Products Co., Ltd , http://en.bwmjyz.com