Abstract: The key of centrifugal pump installation technology is to determine the installation height of pump.
Key words: Centrifugal pump installation
Centrifugal pump installation technology is the key to determining the pump installation height. This height refers to the vertical distance from the water surface of the water source to the center line of the pump impeller. It is not confused with the allowable vacuum height. The allowable vacuum height indicated on the pump nameplate or product manual means the vacuum value on the water inlet section of the pump, Is at 1 standard atmospheric pressure; water temperature of 20 degrees Celsius, the test was measured. It does not consider the condition of the water flow after the water supply pipe is matched. The pump installation height should be allowed to suck vacuum height deducted after the head of the suction pipe loss, the remaining part of the value, it is necessary to overcome the actual terrain water absorption height. Pump installation height can not exceed the calculated value, otherwise, the pump will not pump water. In addition, the impact of the calculated value is the size of the suction pipe lift loss lift, it is appropriate to use the shortest pipe layout, and try to install less elbow and other accessories, but also consider the appropriate with some larger diameter pipes to reduce the flow rate within the pipe.
It should be noted that the pump installation site elevation and water temperature is different from the test conditions, such as the local elevation of 300 meters or pumping water temperature exceeds 20 degrees Celsius, the calculated value to be amended. Ie atmospheric pressure at different elevations and saturated vapor pressure above 20 degrees Celsius. However, when the water temperature is below 20 degrees Celsius, the saturated steam pressure is negligible.
From the pipe installation technology, the suction pipe requires strict sealing, can not leak, leakage, otherwise it will undermine the pump inlet of the vacuum, so that the water pump to reduce the amount of water is not even pumping in serious cases. Therefore, we should conscientiously do the work of the interface of the pipeline to ensure the construction quality of pipeline connection.
product
- DOT-108CB Display board for COP & HOP duplex dot-matrix elevator spare part
- DOT-108C Display board for COP & HOP duplex dot-matrix elevator spare part
- ZLB-A brake display board for elevator control cabinet elevator spare part
- CLT-35024 Switch Power Supplier for elevator control cabinet electrical spare parts
- CLT-15024 Switch Power Supplier for elevator control cabinet electrical spare parts
Specifications
- Stabilize and long life
- With voltage protector
- Multi-option for various kinds of elevators
Heavy Duty Push Button, Electronic Push Button, Elevator Push Button, Elevator Raised Button with Braille
Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com