Water ring vacuum pump in the use of a period of time, there will be jitter phenomenon, accompanied by relatively sharp jarring sound, many people do not know what is the cause.
Under normal circumstances, the water ring vacuum pump the above situation, probably for the following reasons:
1, water ring vacuum pump parts due to damage or due to a solid into the pump chamber, the solution is to check the pump, clean the pump cavity debris.
2, due to water ring vacuum pump motor shaft or shaft wear, the solution to check and replace the new bearing and motor rotor shaft.
3, water ring vacuum pump body and the motor shaft center is not corrected, resulting in damage to the coupling vibration and noise issued by the phenomenon of large, the solution to replace the new shaft or a good axis of correction.
4, when the vacuum is too large, the water ring vacuum pump will issue a special jarring noise, the solution at this time to open a water ring vacuum pump air valve, put some air into the pump can enter the normal state.
Direct-flow Liquid Filling Machine
How to adjust the machine:
1. To replace different types of bottles, the mechanical position of the filling bottle cylinder, the filling bottle cylinder, the filling bottle electric eye, the filling bottle electric eye, the bottle cylinder and the filling nozzle must be adjusted.
2. Filling the bottle with the electric eye must be aligned with the bottleneck of the last bottle. That is, when the bottle is automatically run, the 8th bottle must be placed in the range of the electric eye to be filled into the bottle. The bottle is not cut until the time set by the [Pilling Time" (set in the [Parameter Setting" of the HMI) is reached before the electric eye.
3. Filling and filling the bottle electric eye is installed in the slightly right position of the cylinder of the bottle. When the bottle is started, the cylinder of the bottle is extended, and the cylinder of the filling bottle is retracted; after a number of bottles (which can be set in the [out of the bottle interval" of the human-machine interface), the bottle is retracted and the bottle is started. After all the bottles have gone out (after filling out the bottle electric eyes), the filling bottle cylinders are extended.
4. When filling the bottle and discharging the bottle, the electric eye must be counted in 8 numbers before proceeding to the next step. The user can observe whether the number of bottles and bottles is 8 in the automatic operation screen of the man-machine interface
Direct-Flow Liquid Filling Machine,Fruit Jam Filling Machine,Sause Filling Machine,Juice Filling Machine
Guangdong Xtime Packaging Equipment Co., Ltd. , https://www.xtimepackaging.com