Campus Broadcast System-System Function

System functions

1. Broadcast paging

The system is capable of point-to-point paging, packet paging and full-area paging. The system supports paging priority. No matter what state the terminal server in the system is, as long as there is a paging broadcast signal input, it will automatically force the broadcast and automatically adjust the volume. The areas that have not been paged still play music programs normally without interfering with each other.

2. Simultaneous transmission of multiple audio sources

It can transmit 5 sets of audio sources at the same time. You can manually select the terminal server to play any audio source, or you can force the terminal server to play a certain audio source through the network host.

3. Independent broadcasting (broadcast to the district)

Any terminal server of the network broadcasting system can be connected to a microphone or a music source (through a selector jack) to independently broadcast to the terminal partition without interfering with other terminal partition broadcasts.

4. Scheduled broadcast (unattended automatic broadcast)

Through the system programming of the music and areas that need to be played at different times of the day, the broadcast program is set in advance, and then the automatic broadcast can be realized throughout the day, without the need for special personnel on duty, and fully automated control is achieved.

5.dian dialing broadcasting (dian dialing paging)

The network broadcasting system can be connected to the dian dialing input zone pager (or outside line) to realize the remote (or in-zone) dian dialing broadcast function, and the fixed-point broadcasting, zone broadcasting and synchronous broadcasting can be realized through the dian dialing button.

6. Alarm forced broadcast

One-way alarm forced insertion, external alarm (such as fire alarm, etc.) signal can automatically trigger the entire system to start and access the alarm broadcast once it is alarmed, without human operation, and can realize the N+1~N+4 adjacent layer alarm function according to the pre-set.

7. Two-way intercom

Using the remote call station can realize two-way intercom between the host room and the partition to achieve the purpose of timely communication.