General Info
Product name: Universal String Inserts/Tire String Inserts/Tire Repair Plug Inserts
Part No.: SI-452
Specification:4.5*200mm, black or brown
Brand: HOPSON TYRE REPAIR
Packaging: 5pcs/sheet,6sheets/box
Use: engineerd for TUBELESS TIRE repair use
Â
Selling Points
1. Temporary repairs sealing by compression only.
2. For use in radial and bias ply tires.
3. Excellent for golf carts, lawn mowers and ATV'S
Â
Quality Guaranteed
Excellent quality, similar to REMA TIP TOP AND TECH; Samples can be sent for testing and evaluation.
Â
Description
HOPSON Universal String Inserts can easy and fast repair small injuries in tubeless tires. Unique gray cushion gum flows into the injury and completely seals the innerliner as well as broken cord and cable ends. The insert permanently vulcanizes to the tire, and the tire is immediately ready for use. Flow-Seal inserts are ideal for use in both bias and steel belted radial tires. These inserts are designed for demounted tires and are also excellent repairs when used in any retread process. They can be used to fill an injury and are very effective when backed up with the appropriate repair unit. Note: Industry stands state that the tire should be demounted and repaired from the inside using inserts and appopriate repair unit on the innerliner.Â
Don't miss the opportunity to check our full range of tire repair products.Â
Â
HOPSONÂ TYRE REPAIRÂ will always surprise you!Â
Note: when you send us an inquiry, kindly pls include the following information if possible.
Part No.
Qty
Packaging Detail
Which help us reply to you efficiently. Thank you.
Â
Part No. | Description  | Box Qty  | Case Qty  |
 SI-351 | Dia. 3.5mm , Length 100mm; Brown/Black; 10pcs/sheet | 12 | 80 |
 SI-352 | Dia. 3.5mm , Length 200mm;  Brown/Black; 10pcs/sheet  | 6 | 80 |
 SI-451 | Dia. 4.5mm , Length 100mm; Brown/Black; 5pcs/sheet | 12 | 80 |
 SI-452 | Dia. 4.5mm, Length 200mm; Brown/Black; 5pcs/sheet | 6 | 80 |
 SI-601 | Dia. 6.0mm , Length 100mm; Brown/Black; 5pcs/sheet | 12 | 80 |
 SI-602 | Dia. 6.0mm , Length 200mm; Brown/Black; 5pcs/sheet  |  6 | 80 |
General Info
Product name: Universal String Inserts/Tire String Inserts/Tire Repair Plug Inserts
Part No.: SI-452
Specification:4.5*200mm, black or brown
Brand: HOPSON TYRE REPAIR
Packaging: 5pcs/sheet,6sheets/box
Use: engineerd for TUBELESS TIRE repair use
Â
Selling Points
1. Temporary repairs sealing by compression only.
2. For use in radial and bias ply tires.
3. Excellent for golf carts, lawn mowers and ATV'S
Â
Quality Guaranteed
Excellent quality, similar to REMA TIP TOP AND TECH; Samples can be sent for testing and evaluation.
Â
Description
HOPSON Universal String Inserts can easy and fast repair small injuries in tubeless tires. Unique gray cushion gum flows into the injury and completely seals the innerliner as well as broken cord and cable ends. The insert permanently vulcanizes to the tire, and the tire is immediately ready for use. Flow-Seal inserts are ideal for use in both bias and steel belted radial tires. These inserts are designed for demounted tires and are also excellent repairs when used in any retread process. They can be used to fill an injury and are very effective when backed up with the appropriate repair unit. Note: Industry stands state that the tire should be demounted and repaired from the inside using inserts and appopriate repair unit on the innerliner.Â
Don't miss the opportunity to check our full range of tire repair products.Â
Â
HOPSONÂ TYRE REPAIRÂ will always surprise you!Â
Note: when you send us an inquiry, kindly pls include the following information if possible.
Part No.
Qty
Packaging Detail
Which help us reply to you efficiently. Thank you.
Â
Part No. | Description  | Box Qty  | Case Qty  |
 SI-351 | Dia. 3.5mm , Length 100mm; Brown/Black; 10pcs/sheet | 12 | 80 |
 SI-352 | Dia. 3.5mm , Length 200mm;  Brown/Black; 10pcs/sheet  | 6 | 80 |
 SI-451 | Dia. 4.5mm , Length 100mm; Brown/Black; 5pcs/sheet | 12 | 80 |
 SI-452 | Dia. 4.5mm, Length 200mm; Brown/Black; 5pcs/sheet | 6 | 80 |
 SI-601 | Dia. 6.0mm , Length 100mm; Brown/Black; 5pcs/sheet | 12 | 80 |
 SI-602 | Dia. 6.0mm , Length 200mm; Brown/Black; 5pcs/sheet  |  6 | 80 |
For die casting parts, die Casting Mold Development needs to be completed before production, and then the mold is used to produce the product. Therefore, the development of molds is crucial for die casting production. Reasonable mold structure design, smooth mold opening and closing, etc. directly affect the production efficiency and quality of die castings. Since die-casting needs to produce products on a high-temperature and high-pressure die-casting machine, the requirements for mold structure, strength, etc. are relatively high, so the development cycle and cost of die-casting molds will be relatively high.
Many of SCZY's internal mold design technicians and mold making technicians have worked for more than ten years, and they are able to analyze mold structure and metal flow very well and professionally. So as to ensure the product quality and production efficiency of product die casting. It can effectively reduce the subsequent mold modification and mold modification due to mold reasons.
Die Casting Mold Development, Metal Die Casting, Die Casting Aluminium, Die Casting Metal
Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com