1290 Laser Cutter Professional for Wood Acrylic

Model NO.: FLC1290
Laser Technology: Laser Control Fault Cutting
Cutting Area: 1200*900mm
Power of Laser: 60W-150W
Time of Delivery: Within 7 Days
Laser Tube: CO2 Laser Tube
Trademark: FLYING
Transport Package: Plywood Crate
Specification: 1290
Origin: China
HS Code: 8456110090
FLC1290 laser cutter professional for wood acrylic

Features: 
  This cnc laser system can be applied to many kinds of materials, and has many advantages, such as smooth cutting edges, free from polishing, less noise, less dust, faster processing speed, higher precision, less waste and higher efficiency. It is the best option for upgrading traditional equipments in various industries. 

Applicable Industries: 
Suitable for industries such as billboards, artistic gifts, crystal ornaments, paper cut engraving, bamboo embossment, printing, garments and leather industries, embroidery, interior decoration, frame fabrication and etc. 

Applicable Materials: 
Non-metal materials such as double color boards, acrylic, glass, wood planks, bamboo, rubber, plastic, garments, paper, leather, marble, granite, tiles and etc...
 
Extra Features:
1) Materials can extend through the front and rear doors to allow for a larger work product.
2) Following LED Work light to help see products during laser processing.
3) Red-Dot pointer to help you see the expected laser beam position.
4) AutoFocus touch sensor to easily set the right height for best engraving and cutting.
5) Parts tray for removing small parts or scrap from under the workbed.
6) Fully enclosed laser case yields a class I (user friendly) laser product.

Specifications:
Model  FLC1290
Laser-type 10.6um CO2 glass laser tube w/ water-cooling
Laser power 60W/80W/100W/130W/150W
Working area 1200 x 900mm
Max Engraving speed: 0-64, 000mm/min
Max cutting speed 0-30, 000mm/min
Laser output control   1-100% software setting  
Location precision   Less than 0.01mm
Highest scanning precision   2500DPI  
Operating temperature   0 - 45  
Operating humidity   5- 95% non-condensing
Minimum shaping character   English 1.0 x 1.0mm  
Graphic format supported HPGL, JPG, BMP, PLT, DST, DXF, and AI ...
Driving system   Stepper(Optional: Servo)
Cooling mode   Water-cooling and protection system  
Auxiliary equipments   Exhaust-fans, air-exhaust pipe, air pump, chiller
Controller  DSP
Compatible Software  CorelDraw, AutoCAD, Photoshop, TAJIMA
Slope Engraving    Can be easily designed within the "Grade Engrave" function.
Color separation    Uses color property to set function, speed, and laser power   


We also have other models such as FL5030, FL6040, FLC9060, flc1390 FLC1490, FLC1512, FLC1610D, FLC1325, FLC1520, FLC1530 and etc, feel free to contact us for detailed priced catalogue.

1290 Laser Cutter Professional for Wood Acrylic
1290 Laser Cutter Professional for Wood Acrylic
1290 Laser Cutter Professional for Wood Acrylic
1290 Laser Cutter Professional for Wood Acrylic

Closed Cooling Tower

Why say closed cooling tower is energy saving and environmental protection equipment, more and more users are using this kind of equipment to replace the original equipment (open tower), we can through data analysis and comparison, the two energy data accounting can be obvious. Energy consumption is basically two major aspects, one is water, the other is electricity. Both are energy costs that no cooling tower can escape, unless you leave the equipment on.

First of all, look at the consumption of water. Water is generally consumed in two aspects. One is the flying overflow after spraying, and the other is the evaporation consumption of water.

Let's look at the open cooling tower, the spray water of the tower is basically between two and three percent of the overflow rate, if we according to the daily operation of 10 hours, excluding holidays, 280 days of operation. According to the actual open cooling tower flow of 6000 cubic meters per hour to calculate. 6000*2%*10*280= 336,000 tons of water, and the same closed cooling tower, its spray flying overflow is very small, because after all, the spray work is carried out in the tower, almost can be controlled in a few thousandths, we calculate according to 5 thousandths, the same is 10 hours of work, 280 days a year operation, To achieve the same cooling amplitude is basically 4,500 tons per hour of closed cooling tower is enough, then the calculation results: 4,500 *0.5%*10*280= 63,000 tons, it is not difficult to see, because of the different design structure caused by the waste of spraying water resources, more than 200,000 tons of terror. The bigger the pool of the open tower, the more wasted water, because the evaporation area increases, and the closed cooling tower has no pool, so the consumption here is zero. Judging from the price of a ton of water, just such a equipment, a year to solve the capital of hundreds of thousands of enterprises.

Let's look at the comparison of electric energy, electric energy is not different, because they are all through the same power equipment to operate the equipment, the power of the two is similar, the running time is the same, basically the energy consumption is about the same.

To sum up, for the closed cooling tower energy saving accounting can be strong to open the tower out, and, today are advocating energy conservation and environmental protection, this is the general trend, so the closed cooling tower is more and more favored by the majority of users.

Closed Cooling Tower,Closed Circuit Cross Flow,Closed Loop Cooling Tower,Closed Circuit Cooler

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com