The biggest difference between the walk-behind vibratory roller and the conventional walk-behind roller is that it relies on the mechanical gravity of the machine to increase the compactness of the working medium through the special pneumatic tires for the layering material and the static compaction operation. Compaction machinery. Its unique flexible compaction function is irreplaceable by the general hand-held roller machine, so it is also the ideal compaction equipment for high-grade roads and industrial construction sites. So, how much do you know about the correct use of this walk-behind roller? Here is a brief introduction to the small series of Benma Machinery for everyone.
Do you know how to use the walk-behind vibratory roller correctly?
The correct method for using the walk-behind vibratory roller is as follows:
1. When performing high-speed rolling operation, it is forbidden to start the vibrating device.
2. During the operation of the walk-behind small roller, if the reversing clutch or the starting clutch is found to be slipping, stop immediately, hold the roller and separate the main clutch; check and adjust the reversing clutch or the starting clutch And troubleshooting. Do not increase the throttle, try to drive at high speed and high power, otherwise the clutch plate will be burnt.
3. When the hand-held compact roller changes the direction of travel, the reversing handle must be moved from the forward (reverse) position to the neutral position. After the roller is stopped, the handle is pulled to the backward (forward) position. Do not pull in one position at a time to avoid damage to the machine due to sudden change of direction.
4. When compacting loose materials, it should be subjected to vibration and rolling after 1~2 static pressures.
5. When multiple rollers are combined, the spacing should be greater than 2.5m to avoid collision or steering difficulties.
6. Avoid driving at a long distance; when using a long-distance transition, use other vehicles to carry.
7. It is strictly forbidden to start on the hard road to avoid damage to the vibration damping device or other parts. If you want to know more about the price of the roller, the accessories of the roller can go to Dingcheng Industrial Equipment Engineering Machinery.
The above is the correct way to use the hand-held single drum vibratory roller. Have you mastered it today? If you want to know more about the use of walk-behind vibratory rollers, please pay close attention to our latest developments! (This article is from Situ Rick)
•The machine is specialized in folding and gluing PVC ,PET ,PETG,OPS shrinkage film to shrink sleeve label roll .
•The label is widely used in packing beverage, food , batteries, cap , chemical industry, cosmetics, etc.
•The machine works more stably and efficiently because of excellent tension control system ,intelligent gluing system and reasonable design of mechanical structure .
•It is necessary equipment in shrink sleeve label production.
Center Seaming Machine,Center Seaming Machine With Plate,Moldless Center Seaming Machine,Glue Seaming Machine
Ruian Tiancheng Packing Machinery Co., Ltd. , https://www.tinchinmachine.com