Â
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is including below parts:
1.Aluminum foil unwinding machine  2.Aluminum foil storage device (with ultrasonic welding connector)  3.Aluminum pipe forming system  4.Ultrasonic welding machine  5.Single screw extruder, model SJ60×30 (inner layer PEX)  6.Single screw extruder, model SJ45×25 (inner and outer layer glue)  7.Extrusion die head  8.Single screw extruder, model SJ60×30 (outer layer PEX)  9.Cooling tank (with auto air sealing system for pipe)  10.Belt haul-off unit  11.Double station coiler
SUMMARY
l Material:                     PEX, Aluminum (overlap welding)
l Pipe size range:              Ø16-32mm
l Operating direction:          from right to left
l Center height:                1000 mm
l Machine color:                Jiangsu XinRong standard color (white)
l Cooling water consumption:    5 m3/h ( ≤20ºC,≥0.3MPa )
l Water pool volume:           10 m3
l Compressed air consumption:  0.3 m3/min ( >0.5MPa )
l Power supply:                3 phase 380V( ±10% ) 50Hz
l Total power:                  130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:            28000×3000×2500 mm
l Control system                 Â
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator         Eurotherm U.K
• Inverter:                 ABB or BOSCH-REXROTH
• Low-voltage electrical parts   Â
               Button, switch             Schneider, France
               Contactor                 Schneider, France
               Air switch                 Schneider, France
               Intermediate relay          Schneider, France
               Temperature controller      RKC, Japan
               Heater                    Magal ceramic heater
l Circumstance:
        Working place:              indoors
        Power supply:              no dangerous area
        Temperature:               0-40ºC
        Humidity:                   85% no condensation
Technical parameter
• Screw ,barrel:               38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                         Â
• Sensor model:               PT131B ,50Mpa; power source 24V, output
                              0-10V.
• Screw diameter:             Ø60 mm
• L/D :                       30 :1Â
• Driving motor:            22KW (AC motor )
• AC inverter:                   ABB or BOSCH-REXROTH
• Capacity Max:          ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:          high torque, low noise, hard face special
                                    reduction gearbox for extruder
• Lubrication system:       circulating oil enforced by oil pump,Â
                               infiltration and splash in oil basin
• Heating power:              20KW
• Cooling power:              4×0.18KW enforced air cooling
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter            Â
• Number of forming wheel:    Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel
This is the re-coiler of the PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line:
Â
Â
PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line is including below parts:
1.Aluminum foil unwinding machine  2.Aluminum foil storage device (with ultrasonic welding connector)  3.Aluminum pipe forming system  4.Ultrasonic welding machine  5.Single screw extruder, model SJ60×30 (inner layer PEX)  6.Single screw extruder, model SJ45×25 (inner and outer layer glue)  7.Extrusion die head  8.Single screw extruder, model SJ60×30 (outer layer PEX)  9.Cooling tank (with auto air sealing system for pipe)  10.Belt haul-off unit  11.Double station coiler
SUMMARY
l Material:                     PEX, Aluminum (overlap welding)
l Pipe size range:              Ø16-32mm
l Operating direction:          from right to left
l Center height:                1000 mm
l Machine color:                Jiangsu XinRong standard color (white)
l Cooling water consumption:    5 m3/h ( ≤20ºC,≥0.3MPa )
l Water pool volume:           10 m3
l Compressed air consumption:  0.3 m3/min ( >0.5MPa )
l Power supply:                3 phase 380V( ±10% ) 50Hz
l Total power:                  130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:            28000×3000×2500 mm
l Control system                 Â
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator         Eurotherm U.K
• Inverter:                 ABB or BOSCH-REXROTH
• Low-voltage electrical parts   Â
               Button, switch             Schneider, France
               Contactor                 Schneider, France
               Air switch                 Schneider, France
               Intermediate relay          Schneider, France
               Temperature controller      RKC, Japan
               Heater                    Magal ceramic heater
l Circumstance:
        Working place:              indoors
        Power supply:              no dangerous area
        Temperature:               0-40ºC
        Humidity:                   85% no condensation
Technical parameter
• Screw ,barrel:               38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                         Â
• Sensor model:               PT131B ,50Mpa; power source 24V, output
                              0-10V.
• Screw diameter:             Ø60 mm
• L/D :                       30 :1Â
• Driving motor:            22KW (AC motor )
• AC inverter:                   ABB or BOSCH-REXROTH
• Capacity Max:          ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:          high torque, low noise, hard face special
                                    reduction gearbox for extruder
• Lubrication system:       circulating oil enforced by oil pump,Â
                               infiltration and splash in oil basin
• Heating power:              20KW
• Cooling power:              4×0.18KW enforced air cooling
This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter            Â
• Number of forming wheel:    Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel
This is the re-coiler of the PERT-AL-PERT Pipe Line PERT-AL-PERT Pipe extrusion machine line PERT-AL-PERT Pipe production line:
Â
Thread Rolling Machine Model YY28-80
This model is widely praised for its rational price, easy maintenance and high quality. Besides axial and radial process, it is used to process regular and irregular bolt, through screw etc. with optional embossing roller. The through screw made with this machine in ZheJiang Standard parts base has been exported to US, Canada and Europe.
Specifications:
Pressure of Roller max
150KN
Rotary Speed of Main Shaft
36,47,60,78(r/min)
Working Dia
4-48mm
Feed Speed of Movable shaft
5mm/s
OD of Roller
120-170mm
Thread Length
(no limits)
BD of Roller
54mm
Main Power
4kw
Roller Width max
100mm
Hydraulic Power
2.2kw
Dip Angle of Main Shaft
±5°
Weight
1700kg
Center Distance of Main shaft
120-240mm
Size
1480×1330×1440mm
Thread Rolling Machine Model YY-630
This model mainly is used for various types of precision outer thread rolling, including the common thread, trapezoidal thread and modulus thread, workpiece to circular shape, straightening, rolling wrinkles, light and rolling work, Adapt rolling of material: elongation and tensile strength than 10% less than 1000N/mm² of various carbon steel, alloy steel and non-ferrous metal.
Specifications:
Pressure of Roller max.
630KN
Dip Angle of Main Shaft
±10°
Working Dia
120mm
Rotary speed of Main shaft
8,14,21,33(r/min)
OD of Roller
260mm
Rolling Power
15kw
Roller Dia max
220mm
Hydraulic Power
7.5kw
BD of Roller
100mm
Cooling Power
0.25kw
Roller Width max
200mm
Weight
3000kg
Center Distance of Main shaft
210-380mm
Size
2100*2270*2330mm
Thread rolling machine Model YY160
This model is characterized by rational and solid structure, great active force, low noise, low failure rate, convenient adjustment, high precision in processing screw thread, and wide application. It can have roll finishing on various external threads including regular, trapezoidal and modulus screw threads, and have molding, barreling and knurling processes on workpieces. Driven by worm gear and worm, equipped with an automatic lubrication system, manual, pedal, semi-automatic and automatic controls, it is easy in operation, high in production efficiency and low in labor intensity. Equipped with corresponding thread roller, it can process regular and abnormal bolts of various specifications.
Specifications:
Pressure of Roller max.
160KN
Rotary Speed of Main Shaft
25,40,60,100(r/min)
Rolling Material Diameter
4-56mm
Thread Length
(no limits)
Rolling round aperture
54mm
Main Power
5.5kw
Rolling round of the max weidth
130mm
Hydraulic Power
2.2kw
Dip Angle of Main Shaft
±5°
Weight
1830kg
Center Distance of Main shaft
120-240mm
Size
1450×1520×1430mm
Pictures for machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Thread Rolling Machine
Thread Rolling Machine, Rebar Thread Rolling Machine,Two-Die Thread Rolling Machine,Solid Bar Thread Rolling Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn